SaltyCajun.com http://www.lmcboats.com/
MESSAGE BOARD Register Weather/Tides/Launches Store Go Premium! Sponsors Raffles Mark Forums Read

Notices

Go Back   SaltyCajun.com > Fishing Talk > Boating Talk
Reload this Page Trailer hub seals

Boating Talk For discussion of everything related to boats and motors

Reply
 
Thread Tools Display Modes
  #1  
Old 09-28-2012, 07:36 PM
Hydro's Avatar
Hydro Hydro is offline
King Mackeral
  
Join Date: Jan 2011
Location: Lake Charles
Posts: 2,123
Cash: 5,104
Default Trailer hub seals
Who has the best selection of boat trailer hub parts in Lake Chuck ???

My replacement seal from a leading auto parts house is way too big, no luck matching the numbers on the one I removed from the hub...

Oh, and its the weekend !!! Go figure ...

Hydro
Reply With Quote
  #2  
Old 09-28-2012, 07:43 PM
weedeater's Avatar
weedeater weedeater is offline
Sailfish
  
Join Date: Mar 2011
Location: Moss Bluff, La
Posts: 5,057
Cash: 2,514
Default
Bigtex open on Saturday or Lake Area Marine?
Reply With Quote
  #3  
Old 09-28-2012, 08:02 PM
Hydro's Avatar
Hydro Hydro is offline
King Mackeral
  
Join Date: Jan 2011
Location: Lake Charles
Posts: 2,123
Cash: 5,104
Default
Quote:
Originally Posted by weedeater View Post
Bigtex open on Saturday or Lake Area Marine?
I always forget about Big Tex, might as well start there in the AM... I hate chasing parts down on a weekend ...

Thanks,
Hydro
Reply With Quote
  #4  
Old 09-28-2012, 08:37 PM
cduhon's Avatar
cduhon cduhon is offline
Trophy Trout
  
Join Date: Oct 2009
Location: Sulphur
Posts: 458
Cash: 1,511
Default
Quote:
Originally Posted by Hydro View Post
Who has the best selection of boat trailer hub parts in Lake Chuck ???

My replacement seal from a leading auto parts house is way too big, no luck matching the numbers on the one I removed from the hub...

Oh, and its the weekend !!! Go figure ...

Hydro
Try Clarks Spring in Sulphur. He works most weekends and has anything you need.

Sent from my MB886 using Tapatalk 2
Reply With Quote
  #5  
Old 09-28-2012, 08:50 PM
Jedi Lure Tricks Jedi Lure Tricks is offline
Red Snapper
  
Join Date: Jun 2010
Location: Sulphur
Posts: 1,698
Cash: 2,396
Default
Quote:
Originally Posted by weedeater View Post
Bigtex open on Saturday or Lake Area Marine?
X2 I was there earlier today to pick up a spare trailer tire. they have a nice selection of trailer accessories and parts. i'd be suprised if they didn't have what ya need.


never been to clarks springs.. i guess i'm gonna have to check em out
Reply With Quote
  #6  
Old 09-28-2012, 08:56 PM
Bluechip's Avatar
Bluechip Bluechip is offline
The Camp Cook....
  
Join Date: May 2009
Location: Sulphur, La.
Posts: 10,295
Cash: 14,128
Default
Yes to Clark's Springs....small town business but a good inventory.
Reply With Quote
  #7  
Old 09-28-2012, 11:51 PM
Gerald Gerald is offline
Sailfish
  
Join Date: May 2009
Location: Lake Charles / Moss Bluff
Posts: 4,648
Cash: 4,232
Default
Quote:
Originally Posted by Hydro View Post
Who has the best selection of boat trailer hub parts in Lake Chuck ???

My replacement seal from a leading auto parts house is way too big, no luck matching the numbers on the one I removed from the hub...

Oh, and its the weekend !!! Go figure ...

Hydro

When you don't know the exact size......bring the hub with you so they can measure it to get the correct fit.

To install the seal........I have much better success "Pressing" the seal in using my vice. I have damaged seals trying to line it up and tapping it in. If I remember correctly, a piece of 1.5" dia. PVC pipe fits just right to use it to "tap" the seal in.....but I mess them up too often.
Reply With Quote
  #8  
Old 09-28-2012, 11:54 PM
j.e.hagen's Avatar
j.e.hagen j.e.hagen is offline
Tripletail
  
Join Date: Feb 2012
Location: Hayes, LA
Posts: 515
Cash: 2,833
Default
Last time I had trouble findin trailer parts I found them at lake area marine but these cats seem like they no what they talkin about so I would just go wherever is closest
Reply With Quote
  #9  
Old 09-29-2012, 12:13 AM
j.e.hagen's Avatar
j.e.hagen j.e.hagen is offline
Tripletail
  
Join Date: Feb 2012
Location: Hayes, LA
Posts: 515
Cash: 2,833
Default
Have any of you had leaf springs go out on you if so what's the sounds. My trailer knocks really bad especially when I take boat off I've never messed with them or had them go bad so I'm just assuming that's it.
Reply With Quote
  #10  
Old 09-29-2012, 12:31 AM
Gerald Gerald is offline
Sailfish
  
Join Date: May 2009
Location: Lake Charles / Moss Bluff
Posts: 4,648
Cash: 4,232
Default
Quote:
Originally Posted by j.e.hagen View Post
Have any of you had leaf springs go out on you if so what's the sounds. My trailer knocks really bad especially when I take boat off I've never messed with them or had them go bad so I'm just assuming that's it.
I had one break at the boat launch at Nibblet's park. I think the boat was leaning to one side and I could see the broken spring. I had to leave the boat/trailer and come back the next day after getting a new spring from Clark spring in Sulphur.

Crawl under the trailer and take a look. If a spring is broken you should be able to spot the problem fairly easy.
Reply With Quote
  #11  
Old 09-29-2012, 05:57 AM
Hydro's Avatar
Hydro Hydro is offline
King Mackeral
  
Join Date: Jan 2011
Location: Lake Charles
Posts: 2,123
Cash: 5,104
Default
Quote:
Originally Posted by Gerald View Post
When you don't know the exact size......bring the hub with you so they can measure it to get the correct fit.

To install the seal........I have much better success "Pressing" the seal in using my vice. I have damaged seals trying to line it up and tapping it in. If I remember correctly, a piece of 1.5" dia. PVC pipe fits just right to use it to "tap" the seal in.....but I mess them up too often.

I have sockets and phenolic stock that work well for setting seals... Deadblow mallets and patience are the key...

A little RTV helps "lube" em' up on the way in and keeps them in place once it dries...

At least I'm not missing out on any fishing this morning !

Hydro
Reply With Quote
  #12  
Old 09-29-2012, 06:34 AM
weedeater's Avatar
weedeater weedeater is offline
Sailfish
  
Join Date: Mar 2011
Location: Moss Bluff, La
Posts: 5,057
Cash: 2,514
Default
This is gonna be a good day to work on stuff like that if you have a shop for sure....... I am pose to start building forms for my new house Monday so I hope this mess gets done sooner then they show
Reply With Quote
  #13  
Old 09-29-2012, 10:29 AM
jchief's Avatar
jchief jchief is offline
Calcasieu Extreme Rods
  
Join Date: May 2009
Location: Carlyss, America
Posts: 10,371
Cash: 13,618
Default
Tops in Carlyss also has a lot of trailer parts
Reply With Quote
  #14  
Old 09-29-2012, 10:30 AM
1fastmerc's Avatar
1fastmerc 1fastmerc is offline
Sailfish
  
Join Date: Mar 2011
Location: Moss Bluff
Posts: 4,680
Cash: 1,555
Default
Quote:
Originally Posted by jchief View Post
Tops in Carlyss also has a lot of trailer parts
X2


Sent from my stupid iPhone using Tapatalk
Reply With Quote
  #15  
Old 09-29-2012, 10:46 AM
elebouef elebouef is offline
Trophy Trout
  
Join Date: May 2009
Location: At Home
Posts: 360
Cash: 940
Default
When you go and find the one you need, buy an extra set and keep at home.
For installing seals, try laying a 2x4 flat against it and tapping with a hammer till it is started straight then knock it in.
At least that is how the wife does it over here.
Reply With Quote
  #16  
Old 09-29-2012, 10:54 AM
Hydro's Avatar
Hydro Hydro is offline
King Mackeral
  
Join Date: Jan 2011
Location: Lake Charles
Posts: 2,123
Cash: 5,104
Default
Found bearing "kits" (with seals) at the NAPA on Broad St, and bought the two they had in stock, stopped at UTEC for giggles and they had a box of the seals I needed ...

Everything is back together and ready for action, plus I have enough spare bearings and seals to last a lifetime ...

Thanks for the help !

Hydro
Reply With Quote
  #17  
Old 09-29-2012, 01:38 PM
Dogface Dogface is offline
Red Snapper
  
Join Date: Aug 2011
Location: Lafayette, La.
Posts: 1,485
Cash: 4,571
Default
Quote:
Originally Posted by j.e.hagen View Post
Have any of you had leaf springs go out on you if so what's the sounds. My trailer knocks really bad especially when I take boat off I've never messed with them or had them go bad so I'm just assuming that's it.
Had one break last year and the boat tilted to the side that was broken. That and it was very noticeable when going down the road. Sounded like it bottomed out when I hit a slight bump. I guess it was!
Reply With Quote
  #18  
Old 09-30-2012, 09:21 PM
Suthrngntlmn's Avatar
Suthrngntlmn Suthrngntlmn is offline
Trophy Trout
  
Join Date: May 2009
Location: Iowa, La.
Posts: 420
Cash: 974
Default
If all else fails go to Motion Industries on PPG Drive, you will walk out with a seal.
Reply With Quote
Reply

Bookmarks

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 02:31 PM.


Contact Us - Louisiana's Best Fishing, Hunting, and Outdoors Forum - New Posts - Mobile - Archive - Privacy - Terms - Top

Powered by vBulletin®
Copyright ©2000 - [ARG:3 UNDEFINED], Jelsoft Enterprises Ltd.
vB.Sponsors
vBCredits v1.4 Copyright ©2007 - 2008, PixelFX Studios
SaltyCajun.com logo provided by Bryce Risher

All content, images, designs, and logos are Copyright © 2009-2012,
Salty Cajun, LLC
No unathorized use is permitted
Geo Visitors Map