Copying a 31 Bertram in Quepos Costa Rica

[GringoJohn]

This is kind of a mid process shot. We too a string line and found where we want the boat to sit and ran a string and put some 2 by 3's along the bottom to simulate where the bottom of the plywood should be. Then ran a string line to simulate where the sides of the plywood should be, and then took a bunch of small thin boards we made by cutting a 2 by 3 into a bunch of pieces and are making the outline of the boat. We will transfer that onto 1 inch plywood. Then fiberglass the plywood to mold. I don't know how to describe it well, we just got the birdcages finished.