![]() |
|
|
|
|||||||
| Boating Talk For discussion of everything related to boats and motors |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Can someone recommend a good shop for fiberglass repair around the New Orleans/Luling area?
I've got six 1/4" holes, four 5/16" holes and one 1" hole to patch on my boat. I've talked with Kirk Matherene and Jefferson fiberglass so far but looking for other recommendations. |
|
#2
|
||||
|
||||
|
Sals marine, in Slidell! Heard nothing but the best about them!
Jefferson is sketchy! They polished out some scratches on my boat, that I had to finish on my own to my satisfaction! They did not want the job to begin with, and I just told the guy charge me the regular hourly rate, and make it rite, and no it was not outrageous, but rookie work! I called one other time for an estimate on something else, and never got a response, or return call. From a very reputable source, they said Jefferson has gotten soo busy with commercial and industrial work that the off the street consumer is not much of a concern to the business, and the quality controll has taken a dive since then! Now on a side not I have seen some first hand first class work come from Jefferson over the years! |
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
