|
Inshore Saltwater Fishing Discussion Discuss inshore fishing, tackle, and tactics here! |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
F'N rocks !!!
|
#2
|
||||
|
||||
feel you on that one...had that happen a couple of summers back...boat drifted back and went to crank the motor and...well, you know the rest...wasn't as bad as you got, but still let a few choice words slip... them rocks get you any way they can...
|
#3
|
||||
|
||||
for sure.... thats a stainless prop too !!!! $500 for a new one, thats out... aluminum it is !!!!.. didn't break anything in the motor, THANK GOD !!!!
|
#4
|
||||
|
||||
Thankfully...we're still fighting a carb problem on ours...bout ready to sink the jerk in the ship channel and say it was an accident...
|
#5
|
||||
|
||||
I hear ya.... mine's in the shop also. trim motor burnt up... AGAIN for the 2nd time..... Im about ready to "Accident" the boat, but i got too much blood, sweat and tears in the boat to just "let it go"...Give me a call sometime when your on the lake, i think im going out with my neighbors saturday, but its still up in the air like the clouds..PM sent BTW
|
#6
|
|||
|
|||
prop
i would try to find a used stainless one...
|
#7
|
||||
|
||||
Im bringing it to precision prop's in LC next week to see if they can do anything with it...
|
#8
|
||||
|
||||
DUDE...WHAT THE HELL WERE YOU DOING ON THE ROCKS?.....Use that trolling motor!!!!! Cheaper
__________________
Waltrip's Saltwater Guide Service jeremy@geaux-outdoors.com https://m.facebook.com/waltrip.guideservice?id=148838538646862&_rdr |
#9
|
||||
|
||||
we were down by the old jettie's.... with a north wind, cranked up to get out away from them, had trolling motor down, was just going to EAAAAAASE out.... that didn't freaking happen, trolling motor could't pull us away fast enough with wind and current movement, had to crank big motor up, well you know what happened !!!
Last edited by Jordan; 07-14-2009 at 01:19 PM. |
#10
|
||||
|
||||
Quote:
I've got to drop mine off this week, had to rescue 2 bosts yeterday and i kinda found an oyster reef and was high and almost dri in 3 " of water . Needless to say the prop took some abuse getting the boat off the reef |
#11
|
||||
|
||||
Quote:
|
#12
|
||||
|
||||
I was getting parts for my Chris Craft at Olmsted Shipyard a couple weeks ago and they had a bunch of props in the back that were bought years ago, still in the box.
You might get a good deal cause they were bought by the ship yard a long time ago. |
#13
|
|||
|
|||
I have got a used but in good shape raker prop that can be hubbed for most anything. call me at 337 380 3497 . I will take $100 OBO.
|
#14
|
|||
|
|||
Quote:
He got a white motor. Must be an old Force. You sure dat prop can be hubbed for a chrysler/force? |
#15
|
||||
|
||||
mine fits a 200hp johnson v6 1995 model ocean runner Pitch is 14 1/2X20 i got a 19 now, and i can get on step in like 40', my 20 pitch took my 40 yards to get on step, this is all acceleration and not enough top end, im looking for a 20 or 21 pitch 14 and 1/2 of course.
|
#16
|
||||
|
||||
Ladie's and gents, i thinks i got me a prop. Thanks RAKEDLAKE!!!!!
|
Bookmarks |
|
|