SaltyCajun.com http://www.lmcboats.com/

Notices

Go Back   SaltyCajun.com > Fishing Talk > Boating Talk

Boating Talk For discussion of everything related to boats and motors

Reply
 
Thread Tools Display Modes
  #1  
Old 11-02-2016, 05:01 AM
mr wayne mr wayne is offline
Flounder
 
Join Date: Mar 2015
Location: SW Louisiana
Posts: 38
Cash: 505
Default 07 Kenner 19VX

Anyone here ever ran anything more than a 115hp on this hull? It's a rolled edge hull no liner. Currently run a 115 optimax. Need better performance and speed. Hull is rated for 125hp. I'm going to a 150 pro xs or 175 pro xs. Upgraded to Hyd Steering also. I know all about the legality of exceeding the rating.
Thanks Wayne
Reply With Quote
  #2  
Old 11-02-2016, 06:07 AM
swamp snorkler's Avatar
swamp snorkler swamp snorkler is offline
Swordfish
 
Join Date: May 2009
Location: Raceland
Posts: 6,731
Cash: 3,427
Default

What Prop you running?

Are you trying to get a better hole shot?
More top end speed?
Carry a bigger load?
Reply With Quote
  #3  
Old 11-02-2016, 07:29 AM
mr wayne mr wayne is offline
Flounder
 
Join Date: Mar 2015
Location: SW Louisiana
Posts: 38
Cash: 505
Default

Yes to all your quetions. I am running a 19p lazer2. Little cup added. Hole shot little slow. Top end 42 with theguts hung out on a good day. Rpms 5400 at that speed. Also have a 20p lazer2. Hole shot slow. Top end 40-41 on a good day. Rpms 5200. The 19 is best out of these 2. To cruise at 36-37 mph rpms are 4800-4900.
Reply With Quote
  #4  
Old 11-02-2016, 08:58 AM
seapickle seapickle is offline
Sand Trout
 
Join Date: Jun 2013
Location: thibodaux
Posts: 24
Cash: 660
Default

we really need to know more info...

1) find out your motors max rpms it may be 5500 but im not 100%. You need to be hitting that max when light/average loaded.

2) Your prop sucks haha id turn a tempest with that optimax or a rev 4 or trophy if you want a 4 blade. May need to drop to a 18 or 17 pitch for the tempest (depending if 5500rpms is the motors max)

3) You may want to add a jackplate. Your motor may be too low causing you to bog down and robbing rpms.
Reply With Quote
  #5  
Old 11-02-2016, 10:49 AM
mr wayne mr wayne is offline
Flounder
 
Join Date: Mar 2015
Location: SW Louisiana
Posts: 38
Cash: 505
Default

Max rpm 5750. Turned 19p 6000 before cup. Have hyd jackplate. Tried running 20 before a little cup. With 20p before cup would run 43-44 @ 5200-5300 rpm. I asked if anyone here has ran anything bigger than a 115 on this hull to see how this hull ran with something bigger. I am fixing to put a pro xs 175 on it. I have owned boats for the last 40 yrs. i'm not playing with anymore props. I appreciate you wanting to help with this 115 but it will be for sale soon. So lets go back to the question i posted. Thanks
Reply With Quote
  #6  
Old 11-03-2016, 06:27 AM
swamp snorkler's Avatar
swamp snorkler swamp snorkler is offline
Swordfish
 
Join Date: May 2009
Location: Raceland
Posts: 6,731
Cash: 3,427
Default

Rule of thumb is it takes 5hp to gain 1 mph, going to a 175 you should gain 12MPH
Reply With Quote
  #7  
Old 11-03-2016, 09:07 AM
mr wayne mr wayne is offline
Flounder
 
Join Date: Mar 2015
Location: SW Louisiana
Posts: 38
Cash: 505
Default

Quote:
Originally Posted by swamp snorkler View Post
Rule of thumb is it takes 5hp to gain 1 mph, going to a 175 you should gain 12MPH
If thats the case i should be running every bit of 23 mph now. Every application will be so different that your rule of thumb does not apply.
Reply With Quote
  #8  
Old 11-03-2016, 01:13 PM
swamp snorkler's Avatar
swamp snorkler swamp snorkler is offline
Swordfish
 
Join Date: May 2009
Location: Raceland
Posts: 6,731
Cash: 3,427
Default

Cant help some people
Reply With Quote
  #9  
Old 11-03-2016, 02:03 PM
B-Stealth B-Stealth is offline
Red Snapper
 
Join Date: May 2009
Location: Lake Charles
Posts: 1,382
Cash: 1,461
Default

Quote:
Originally Posted by mr wayne View Post
If thats the case i should be running every bit of 23 mph now. Every application will be so different that your rule of thumb does not apply.
Mr. Wayne, (heavy on the mister) you were given some pretty solid advice, if 5hp=1mph then your new top speed will be around 54mph. I would say thats going to be pretty close. A simple thank you would be prudent.

You probably wanted someone to tell you that a 175 will propel your vessel to 65+ mph but I don't think that's gonna happen unless your hull is Helium injected with adjustable freeboard.
Reply With Quote
  #10  
Old 11-03-2016, 04:56 PM
mr wayne mr wayne is offline
Flounder
 
Join Date: Mar 2015
Location: SW Louisiana
Posts: 38
Cash: 505
Default

Quote:
Originally Posted by swamp snorkler View Post
Cant help some people
I didn't mean it the way it sounded. My apologies. I do appreciate the help. I should have asked how this hull handled with more hp. Never heard of the rule of thumb before but was hoping to run in the mid to upper 50's. I'm not interested in making this 115 run any better. I've been chasing 2 mph with different props too long.
Thanks Wayne
Reply With Quote
  #11  
Old 11-07-2016, 05:41 AM
seapickle seapickle is offline
Sand Trout
 
Join Date: Jun 2013
Location: thibodaux
Posts: 24
Cash: 660
Default

Well I could help there...I run a very similar hull. I have a 2016 frontier 2104. I run it with a yamaha f200 on a 6" hydro jackplate turning a 18p reliance prop. I run 54 with 2 people full gas and loaded down and 50 with 3-4people full gas loaded down. Boat jumps out of the hole and very responsive all the way through the throttle.
150hp on your boat will be the same. It's a huge difference than the small hub 115. The reliance prop was made by yamaha for the 150 and 200hp.
Reply With Quote
  #12  
Old 11-07-2016, 09:38 AM
mr wayne mr wayne is offline
Flounder
 
Join Date: Mar 2015
Location: SW Louisiana
Posts: 38
Cash: 505
Default

Thanks. That's good numbers for boat that size with a good fishing load.
Reply With Quote
  #13  
Old 11-07-2016, 09:52 AM
seapickle seapickle is offline
Sand Trout
 
Join Date: Jun 2013
Location: thibodaux
Posts: 24
Cash: 660
Default

yeah those are max speeds aired out fine tuning jackplate. Depending on water conditions and air temp i may lose 1-2 mph. The hull and f200 does really well with the right prop. MY buddy wit the same boat and the 200 SHO does about 5mph better than me. He is 1:1 with mph:rpm im about 5-7 mph behing my rpms
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:05 PM.



Powered by vBulletin®
Copyright ©2000 - [ARG:3 UNDEFINED], Jelsoft Enterprises Ltd.
vB.Sponsors
vBCredits v1.4 Copyright ©2007 - 2008, PixelFX Studios
SaltyCajun.com logo provided by Bryce Risher

All content, images, designs, and logos are Copyright © 2009-2012,
Salty Cajun, LLC
No unathorized use is permitted
Geo Visitors Map