![]() |
![]() |
![]() |
|
The Shooting Range (Guns & Ammo) Discuss anything related to firearms and ammunition here! |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]() |
#2
|
||||
|
||||
![]()
A buddy of mine use to have the same probs. with his I don't remember what the issue was , but he gave up on it and bought an auto! Sorry, and good luck with it!
|
#3
|
||||
|
||||
![]()
I would contact Browning as soon as possible . I am sure they will make it rite since it is a new gun. I have always had excellent service from them .
|
#4
|
||||
|
||||
![]()
Thats what I thought i would have to do. At first i thought i was short shucking the gun, but it did it a couple of times when i was just running the shells through it making shure to pump it fully so i know it cant be a short shucking issue.
|
#5
|
||||
|
||||
![]()
I have a little older BPS. I have always shot mostly 3 1/2" out of mine. I was having issues with the first bullet getting jammed after firing and the gun not shucking. I would have to slam it down at the stock on the blind to get the shell to shuck. At the time I was shooting kent brand shells. I switched bullets and never had another problem (at least not a consistent one). I shoot winchester and remington now and never miss a lick.
Moral of the story is try a different brand of bullet to make sure it still does it before you go any further. |
#6
|
||||
|
||||
![]()
I'll second that motion LCD, definitly try a different shell maker to see if that makes the gun operate properly.
|
#7
|
||||
|
||||
![]()
The only shells I had problems with was remington sportsmans and estate,when I was shooting a BPS. You may also be trying to cycle the pump to fast ,I had a buddy who did that and had a similar issue.
|
#8
|
||||
|
||||
![]()
Its the estates that have been giving me the issues, but i have a box of kents that i can try and i can borrow some of my cousins winchester shells because i cant get any more shells before monday. Hopefully ill find out monday if i have issues or not.
|
#9
|
||||
|
||||
![]()
Different shells still gave me problems, anyone have experience with sending guns back?
|
#10
|
||||
|
||||
![]() Quote:
|
#11
|
|||
|
|||
![]()
I had that problem on an older BPS. Took it to a gun smith and he bent one of the little arms and never had a problem again. It's a known issue with some BPS's that get worn.
|
#12
|
||||
|
||||
![]()
I ended up sending it back and they changed 2 parts. I still havnt shot it since i got it back. so i hope it works right now.
|
#13
|
||||
|
||||
![]()
I had that problem with mine on the first box. I sent it back an they fixed it no questions asked. Haven't had a problem since.
|
#14
|
|||
|
|||
![]()
my bps only like the cheap shells. It will not shoot high end shells.
do not know why but it shoots good. |
![]() |
Bookmarks |
|
|