|
General Discussion (Everything Else) Discuss anything that doesn't belong in any other forums here. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Corrosion x
|
#2
|
||||
|
||||
Academy
|
#3
|
||||
|
||||
I think Lake Area Marine carries it also.
|
#4
|
||||
|
||||
|
#5
|
||||
|
||||
Do any of you use it? Is it good and what all do you spray it on?
|
#6
|
||||
|
||||
I use it on anything that will corrode. Works great!
|
#7
|
||||
|
||||
Works well. Sprayed it on all exposed terminals on jackplate pumps and battery terminals , 0 corrosion in two years . It sprays hard so have a paper towel close for clean up .
|
#8
|
||||
|
||||
Neverseize works just as well if not better.
|
#9
|
||||
|
||||
I've always heard that NeverSeize did not play well with saltwater. Never tried it though. Have you used it around salt water?
|
#10
|
|||
|
|||
Neverseize is good stuff but very messy!!! They make an hd of it thats really really good!!!!spray
|
#11
|
||||
|
||||
Quote:
Quote:
& only messy if you slop it everywhere! It don't take much! |
#12
|
||||
|
||||
Cool, thanks for the info.
|
#13
|
||||
|
||||
Everseize
Have not used Corrosion X but have seen tons of Neverseize used near saltwater.
We had so much trouble from coated screw threads & caps that I started calling it "ever seize". After a few years it would dry & harden becoming just like glue. It gave us problems on both galvanized & stainless metals. |
#14
|
||||
|
||||
Corrosion X is awesome. Red can on all electrical connections and fuses.
|
#15
|
||||
|
||||
Thanks everyone for your input.
|
Bookmarks |
|
|