|
Boating Talk For discussion of everything related to boats and motors |
|
Thread Tools | Display Modes |
#21
|
||||
|
||||
|
#22
|
|||
|
|||
Ya'll must have a really hot solder gun to heat up that # 8 wire enough to also melt the solder.
I got some brass "U" shapped clamps [from Lowes] to connect the wires and then used electrical tap. Also, under my front deck I found that there was another "plug-in" type connector that I also removed. |
#23
|
|||
|
|||
Go to a welding supply stop and buy the eyes there. There is also a tool to crimp them, which you hit with a hammer. Afterwards, heat it up with a small torch and drop in your solder. Same for the splices, use a torch. You can make your own butt splices with copper tubing.
|
Bookmarks |
|
|