|
Boating Talk For discussion of everything related to boats and motors |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
power pole height
|
#2
|
||||
|
||||
I have the 8 ft powerpole, it is 4 ft tall from the top of the mounting plate and I would assume the 10 ft would be 5 ft.
|
#3
|
||||
|
||||
It's almost even with the top of my motor (175 Suzuki)
|
#4
|
||||
|
||||
mine is about the same height as the motor.
|
#5
|
||||
|
||||
Mine is a good bit higher than my motorImageUploadedByTapatalk1367111586.966991.jpg highest thing on my boat
|
#6
|
||||
|
||||
Thanks for the replies. My stall is a little over 9 FT and that leaves a little over 3ft of clearance for my motor. I think the 10 FT blade will be tight.ImageUploadedByTapatalk1367112304.760847.jpgImageUploadedByTapatalk1367112321.327406.jpg
|
#7
|
||||
|
||||
Mine was higher than motor also. I had the 8'. If you can the 10'er I would go with it! PP in down position is going to be half of length.
|
#8
|
||||
|
||||
They need to come out with a braket with a pin and hinge so you can lay it own in the boat. Kind of like a folding trailer tongue
|
Bookmarks |
|
|