|
General Discussion (Everything Else) Discuss anything that doesn't belong in any other forums here. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Welders?
|
#2
|
||||
|
||||
Meineke muffler?
|
#3
|
||||
|
||||
They want you to buy the cats from them. My son has his own he got at a great price online. |
#4
|
||||
|
||||
There is a welding shop off of Big Lake Road but I don't know if they have the ability to get under a vehicle. I think most welding shops might have that issue. I think it is West Side Welding. I know a lot of people bring their boats there for repair work and they do a good job. But this is entirely different. Their number is (337) 474-4553
|
#5
|
||||
|
||||
Muffler shop in westlake?
|
#6
|
||||
|
||||
Quote:
Your problem is you're saying it wrong. You mean a "Cadillac Convertor" |
#7
|
|||
|
|||
Quote:
Add Southside Welding at 5726 Common. 477-0527. |
#8
|
|||
|
|||
Go to One Stop auto on the corner of E School St and Common St....I had a muffler that I brought in welded on years ago, quick and cheap.
|
#9
|
|||
|
|||
I'm not sure if Southside would do it but I recommend them also...You really need a lift to get it done efficiently.
|
#10
|
|||
|
|||
Try the Muffler shop on Hwy 14 just south of Broad street[right behind the Gas station].
Several years ago, I had them make several wells to install a new muffler on my GoDevil engine. Cost was only $20. |
#11
|
||||
|
||||
Thanks, guys. I'll try a couple of these. Westlake muffler wants $100 to weld them on.
|
#12
|
||||
|
||||
100 bucks don't sound like too much with the labor that's involved. That's assuming that you have to remove the old ones first.
|
#13
|
|||
|
|||
Yep not bad at all
|
#14
|
|||
|
|||
$100 to cut out and install new is a deal.
|
#15
|
||||
|
||||
|
#16
|
||||
|
||||
I wouldn't put a car on a lift for less than $100, especially if they want to bring their own internet parts.
|
#17
|
||||
|
||||
Old ones are cut off. My son is a starving college kid and he won't accept my $ help.
|
Bookmarks |
|
|