|
General Discussion (Everything Else) Discuss anything that doesn't belong in any other forums here. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Need input
ImageUploadedByTapatalk1362189340.676906.jpgImageUploadedByTapatalk1362189358.565431.jpg |
#2
|
||||
|
||||
JMO looks like a helluva deal
|
#3
|
||||
|
||||
Don't sound like a bad deal at all
|
#4
|
||||
|
||||
If you dont want it, I do!
|
#5
|
||||
|
||||
|
#6
|
||||
|
||||
Might start a bidding war, I got 13,500!!
Sent from my iPhone using Tapatalk |
#7
|
||||
|
||||
Looks like a great boat..... Good buy for sure Tony
Not sure the weight of the boat but only thing that could possibly have question is if its under powered. Which really don't make that much of a big deal
__________________
Waltrip's Saltwater Guide Service jeremy@geaux-outdoors.com https://m.facebook.com/waltrip.guideservice?id=148838538646862&_rdr |
#8
|
||||
|
||||
Almost sounds too good to be true....if everything checks out that is a good buy. First thing you gotta do is take off that goofy useless whale tail.
|
#9
|
||||
|
||||
$13, 550!!!
|
#10
|
||||
|
||||
Boat weight is 2010 lbs dry, he said it runs about 45 wot. You don't think the thing on the bottom of motor is worth having?
|
#11
|
||||
|
||||
Nope....all they are is a bandaid for a prop issue. Most of the time on bay boats the dealers install the wrong syle prop for the boat. On a bay boat you need a prop with a larger diameter like a mercury mirage. The whale tails will actually hurt performance....they cause drag and loose speed.
|
#12
|
||||
|
||||
Buy the boat and ill hook you up with a Mirage thats been sitting in my shop
Sent from my iPhone using Tapatalk |
#13
|
||||
|
||||
Another big problem people have is the motor mounted too low on the transom causing drag and porpoising. You won't have that problem with a hydraulic jack plate.
|
#14
|
||||
|
||||
Looks to be mounted in a good position.....that hull is foam filled. Its heavy! It'll never be real fast
|
#15
|
||||
|
||||
Agreed.....it is more important to have a good cruise speed at 35-40mph without burning too much gas. Suzuki's are great on fuel if they are propped right. They need to be able to turn 6,000 rpm's at WOT. Any less than that you will not get a good cruise speed,burn more fuel,and have a bad holeshot.
|
#16
|
||||
|
||||
Sooo.......gues who is going look at that house for sale behind yours......yep! This guy!!!
|
#17
|
||||
|
||||
Motor slightly undersized for 22' boat BUT I could deal with it at that price. Just get a compression test done, open the hatches if it looks clean and organized chances are owner took care of it , if it looks a mess ......
|
#18
|
||||
|
||||
Thanks guys I appreciate all the input!
|
#19
|
||||
|
||||
yeah I would bring it to a shop and get them to run the computer data and see how many hours he ran it at each rpm level and get the compression tested. Sounds like a great deal. I would make sure all the electrical components work too(livewells, bilge pump, etc) Sounds like a great deal though
|
#20
|
||||
|
||||
My co worker has an 05 22ft. sea chaser with yamaha 150 hpdi. And he get 45 wot. Not bad on gas either. Smooth riding boat to.
sent from my Galaxy NOTE II |
Bookmarks |
|
|