|
Hunting Discussion Discuss anything related to hunting here! |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Building Skid Blind - Q
Question: How would you build frame and walls, open on one end? I want to make it round or triangular instead of box-like so it'll blend in. Also will use hog panel or fencing like floors for walls. |
#2
|
|||
|
|||
You could fasten cow panel all the way around it in a way it to where it curves.. Haybale shape is what I had in mind.. Or just have the corners rounded
Sent from my iPad using Tapatalk |
#3
|
||||
|
||||
blind
duck blind? that thing is probably gonna make some noise when it flexes when you move around in it
|
#4
|
||||
|
||||
Quote:
Any ideas for what the frame could be made out of and how to attach it to the base? I'll need something to hold up the wall panels, and trying to keep it lightweight. |
#5
|
||||
|
||||
alum
you can probably pick up some aluminum angle and flat bar for cheap, i would get away from them hose clamps and either have it welded or bolted together
|
#6
|
||||
|
||||
We help out a lot with customizing duck boats and blinds. If you decide to go aluminum and lightweight we can help with the welding/building. Just give us a shout it's our specialty. 337.706-7789. Acadiana Propeller & Fabrication.
|
#7
|
||||
|
||||
How bout galvanized conduit tubing with the screw type clamps you can get at the hardware stores?
|
Bookmarks |
|
|