SaltyCajun.com

SaltyCajun.com (http://www.saltycajun.com/forum/index.php)
-   Boating Talk (http://www.saltycajun.com/forum/forumdisplay.php?f=28)
-   -   Thank's Southshore Marine (http://www.saltycajun.com/forum/showthread.php?t=10575)

Jo-boater 05-22-2010 03:48 PM

Thank's Southshore Marine
 
:)I just received my new depth finder Thursday. I ordered from Southshore Marine and am very pleased with their service. The website was easy to order from, selection was good, speed of delivery excellent, and the prices were as good or better than most of the "big boys" (Cabela's etc.). Thanks again. I enjoy getting good service from local people. Just a little positive feedback from a satisfied customer.:)

jlincecum 05-22-2010 03:54 PM

:confused:no pics?????

Sea-Trac Offshore 05-22-2010 04:19 PM

Very happy to help you. Please give me some feedback after using that unit as I have been very interested in one myself.

Jo-boater 05-22-2010 04:36 PM

1 Attachment(s)
Quote:

Originally Posted by jlincecum (Post 155211)
:confused:no pics?????

Here is a pic. I haven't mounted it yet. I just ordered a Ram Mount for it, when it comes in I will finish mounting it.

Jo-boater 05-22-2010 04:37 PM

Quote:

Originally Posted by Southshore Marine (Post 155214)
Very happy to help you. Please give me some feedback after using that unit as I have been very interested in one myself.

;)Sure thing.

Sea-Trac Offshore 05-22-2010 04:58 PM

Wish I knew you needed a ram mount. I carry many other items just do not have them loaded to the site as of yet

Jo-boater 05-22-2010 07:35 PM

Quote:

Originally Posted by Southshore Marine (Post 155224)
Wish I knew you needed a ram mount. I carry many other items just do not have them loaded to the site as of yet

The instructions call for a 3 amp inline fuse. I am not sure how these are installed. Do you have any of these or know what type would be best and where to get it? I just got finished mounting the transducer.

Sea-Trac Offshore 05-22-2010 07:42 PM

Where are you picking up your power at for the power cable? You need to butt connect one on the positive side of the power cable. Is there not one in the package? All Lowrance units come with them...

Jo-boater 05-22-2010 07:53 PM

Quote:

Originally Posted by Southshore Marine (Post 155271)
Where are you picking up your power at for the power cable? You need to butt connect one on the positive side of the power cable. Is there not one in the package? All Lowrance units come with them...

There was none in the package or in the bag with the mounting hardware. I just went and checked the packaging again.

Sea-Trac Offshore 05-22-2010 07:57 PM

I know all Lowrances I have installed came with them I do not know why that model did not. well.... You can get one at West Marine or pretty much any part stocking dealer. Even radio shack. I like the glass fuses. While there get some dielectric grease and put some in the fuse holder as well.

Jo-boater 05-22-2010 08:01 PM

Thanks for the help. It sounds easy enough.

Sea-Trac Offshore 05-22-2010 08:05 PM

Very easy.

Jo-boater 06-09-2010 10:59 PM

Quote:

Originally Posted by Southshore Marine (Post 155214)
Very happy to help you. Please give me some feedback after using that unit as I have been very interested in one myself.

It took a while but I finally got to go run my boat since I installed the Fishfinder. It worked very well, and I am very pleased with the unit. It has a super clear display and very easy to use with a lot of detail. Most of the water that I take my Jo-boat in is shallow, so I had it in the shallow water mode which seemed to work good. The deepest water we had today about 32 feet. When the water transitioned quickly from deep to shallow the unit would blink for a short time then catch up. But some of that may have been due to extra surface bubbles caused by the very bent out of shape bottom on my 1969 model Qua****a jo-boat. Thanks again Southshore Marine for a good deal on a good unit and the little hook tips afterwards.:)

Jo-boater 06-09-2010 11:02 PM

I don't know what all the **** are for in the above post. I did not put them there. Did I do something wrong, it is only the makers name of my boat and also the name of an Indian tribe.

LaAngler 06-09-2010 11:28 PM

word filter


All times are GMT -5. The time now is 06:26 AM.

Powered by vBulletin®
Copyright ©2000 - [ARG:3 UNDEFINED], Jelsoft Enterprises Ltd.
vB.Sponsors
All content, images, designs, and logos are Copyright © 2009-2012,
Salty Cajun, LLC
No unathorized use is permitted