Trim Tab Troubles?!?!
 

My Lenco trim tabs are not working. When I hit the switch for either tab the control box clicks but I am not getting any response out of my tabs. Is it a safe bet to replace the control box or is there another reason the tabs may not be working? I realize that without looking at the boat it is hard to give a diagnosis but I was hoping someone had a similar problem that was an easy fix. Any help on this matter is appreciated.

IF I remeber correctly, there is a solonoid that controls the tabs. It may be out.

Sounds like solenoid is stuck open, try hitting switch & tapping the solenoid with screwdriver handle this will sometimes break it free

Lucas, You want me to come help you trouble shoot?

I'm sure we can work out a trade!!! ;)

Lucas,
If you are getting power to the box but not out. Your control box is probably shot. There are no external solenoids, its all contained in the control box. Lencos part # for the replacement box is 30134-001. You can call Lenco to verify, they also have a good technical dept
772-288-2662

Ryan, You cutting in on my trip I'm trying to work out in trade? Hahaha

Lol, sorry Paul! Did you ever get those flies?

Yes I did Ryan and thanks, they look great. I'm going to start bringing the rod and flies on most all of my trips. I figure if I can catch the specks working under the birds I should have a chance. That is if I don't catch a gull instead.:eek:

Cool deal! Im working on a couple new ones for trout, ill send you some

UHH
 

I know for a fact they will catch birds.

That's what I'm worried about! :eek:

Thanks Ryan, I'll ley you know how they do on the Gulls/Specks over here soon!:rotfl:

Thanks for the help guys! I check into it and see what I can do.