Flipping Your Rear End
 

Corey this one is for you and whoever else may know what im talking bout.....is this a good idea...is it safe to do? will it cause other problems..? me and a buddy are thinking about doin mine tonight and knockin back a few in the process but would like to know im not digging my own grave...

As in putting the leaf spring under (or over) the axle?

yes as in dropping my truck in the back

Got good fillings in your teeth? Not for long!!!!

Ya going up or down? Really, if ya got the kit, it isn't that bad. Going either way, you add a little strain to your u joints(pinion angle will change a little) but, it isn't anything substantial.

Get ready though, on most vehicles, you have to undo e-brake cables and such which is kinda a pain in the arse if it isn't a brand new vehicle.

Since you're going down with it, I would recommend changing shocks while you're in there. If ya don't, the ride quality will suffer and you'll be changing them out soon enough anyway due to failure. Also, you may need to get after your bumpstops with a saws-all. You won't have to cut them completely off but, likely will have to cut them down some.

If ya get in a bind, you got my number.

Yessir didn't even think about shocks...what so you recommend for those?? Also would you use springs or go with drop spindles in the front?

Spindles in the front for sure. Your tires will wear at a faster rate using springs. Spindles cost a little more but, tires cost a LOT more! Belltech makes a good lowered shock. There are a million manufacturers out there. Just make sure you get a shock that is tuned to the amount you are lowering the vehicle.

I can get that type of stuff for you but, I doubt I could save ya enough money to justify the trip up here to get it.

Are you a mexican?

Sooner fans everywhere. :rolleyes:

Spindles for sure dude, dont want to go the spring route! Get online and get McGaughys spindles and what not.
What kind of vehicle are you working with?
here is my GMC McGaughys Spindles, and strut relocaters up front. Flip Kit and shackles out back with helper bags. BE PREPARED FOR IT TO RIDE LIKE A TANK!!
http://i170.photobucket.com/albums/u...m/IMG_0025.jpg

Are you a N I G G.....?? Y I gotta be a Beamer cause I'm driving a lowered truck *****? Don't worry bout me I got a 98 z to roll over you in too hombre

7:30pm......hows progress?

That joker is clean bruh...I'm workin with a 06 chevy I paid it off so now I'm making it my play truck kinda sorta...And I'm goin with spindles no doubt

And I'm murdered out already just like yours I got 24 inch u2 55's on the way

Nice!!! how low you going?

It's already dropped 3 inches in the back and I was gonna go with a 3,5 or 5,7 drop kit but flippin and spindles is much more affordable and doable by my own hands..what you got on yours?

Putting it on hold till next weekend I'm ordering shocks and spindles right now

Let's body drop and bag it! I'll make ya a heckuva deal just to have one on the streets of s la!

My best friend has a 01 gmc sanoma bagged..it's a bad dude..and I'd love to do it but it's always breaking lol