Building a SHOP!!!
 

If anyone knows any contractors that would like to work in the rayne crowley area, please send me their information.

Im looking to build a 30 x 60 shop with a 15x60 overhang on one side. I want it on a slab with a little plumbing and electrical. Ive gotten a few quotes and they are, what i think are to high. Thanks for all of the help. And i am willing to take any advice on the type of building i should put.

Just hurry up and build the damn thing already and stop being a tight a$$!!!!!

Bergeron's Metal Buildings, LLC in Scott 337-234-8857
There building my 46x55 with a 25x55 over hang ! It's going to be my house not a shop !

Make everything as big as you can afford. Shop, Doors, Walls, etc. You won't regret it later. I built my own but would not do that again. If this one ever gets blow over I'll be shopping for a contractor also.

listen to this guy!! My dad built his thinking he won't need a bigger one, well we bought a bigger boat and now it takes up almost the whole shop and we are looking for an even bigger boat, so if we do get a bigger boat we're either going to have to make the door bigger or keep the boat outside. So go BIG! I'll ask my dad who built his and try to get youthe info. My dad's pretty tight and I know he did a lot of research before building

Call Mueller buildings in Port Allen. They have good prices and good products.

Not the cheapest, but the best!

Monty Fruge - 337.945.4619
Affordable Structures and Insulation
Church Point, LA

He and I used to work together as paramedics, then he started doing buildings on the side. For the last several years, he has been doing them full time and does some really good work.

Dennis scott @ scout metal in lake charles is very competetive
337-477-1970

also if you can afford it, isnsulate it. I didn't do mine and it sucks in the winter.

At least insulate the roof. I have several buildings and covers, my worst mistake was not insulating the ceiling when it was built.

Call Pox, hes in construction. Tell him he needs to cut costs by getting all materials through Direct Buy.






jj man.. you have to have thik skin today podna

S&S Steel Buildings
337-754-5097

Ask for Chris

X2 on Chris

Sure do!! Its funny stuff!!

lmao:rotfl::rotfl:

hmmmmm .........:cool: thats all im gonna say hmmmmmmmmmmm

He also built mine by reference from fff. Only part of my house construction that was painless.

Get out of my thread pox!! Never seen this many haters!!

kinda like you hatin on the other thread??? in alll seriousness are you looking for a wood shop or metal building? if you are looking for a wood shop shoot me a pm and ill give you my email and ill look over you prints and let you know what i think it would run to build it,

:rotfl:

You're jokin', right? :cool: