SaltyCajun.com
Page 1 of 2 1 2
Show 50 post(s) from this thread on one page

SaltyCajun.com (http://www.saltycajun.com/forum/index.php)
-   Boating Talk (http://www.saltycajun.com/forum/forumdisplay.php?f=28)
-   -   Holeshot problemos (http://www.saltycajun.com/forum/showthread.php?t=25372)

iron man 11-20-2011 02:15 PM
Holeshot problemos
 
What would cause a boat to not be able to get out of the hole? 1996 Bullet running a 260hp Evinrude with a 27 pitch prop.

Montauk17 11-20-2011 02:18 PM
Get rid of that evinrude,problem solved

jdm4x43732 11-20-2011 02:21 PM
Overloaded with Guns, Ammo, BS, and lies........

Montauk17 11-20-2011 02:22 PM
Quote:
Originally Posted by jdm4x43732 (Post 352416)
Overloaded with Guns, Ammo, BS, and lies........
LOL that too :rotfl:

iron man 11-20-2011 02:25 PM
Aside from the smart azz comments, what would cause A BULLET WITH A 260hp EVINRUDE not be able to get out of the hole.

jchief 11-20-2011 02:25 PM
RPMs turning up?

iron man 11-20-2011 02:28 PM
Quote:
Originally Posted by jchief (Post 352419)
RPMs turning up?
It sounds like it but the tac, and water pressure are disconnected for some reason as well as the rev limiter.

Montauk17 11-20-2011 02:31 PM
Quote:
Originally Posted by iron man (Post 352420)
It sounds like it but the tac, and water pressure are disconnected for some reason as well as the rev limiter.
That's a good way to burn up a motor

jchief 11-20-2011 02:32 PM
spun hub if the rpms are there.

And Montauk is correct

iron man 11-20-2011 02:51 PM
Quote:
Originally Posted by Montauk17 (Post 352421)
That's a good way to burn up a motor
The shop that Steven brought his boat to did that so he said, hmm more business down the road for you then.

Quote:
Originally Posted by jchief (Post 352422)
spun hub if the rpms are there.

And Montauk is correct
Thats what my dad said it could be. It spins fine idling in forward.

Montauk17 11-20-2011 02:54 PM
Quote:
Originally Posted by iron man (Post 352424)
The shop that Steven brought his boat to did that so he said, hmm more business down the road for you then.
I only rebuild motors for podnas.

weedeater 11-20-2011 03:53 PM
go back to second post, a stock PRO XS will probly out run that thing

Montauk17 11-20-2011 03:56 PM
Quote:
Originally Posted by weedeater (Post 352466)
go back to second post, a stock PRO XS will probly out run that thing
A 150 pro xs :rotfl:

weedeater 11-20-2011 04:00 PM
Quote:
Originally Posted by Montauk17 (Post 352468)
A 150 pro xs :rotfl:
i was thinkin 115hp

gonzalesdave 11-20-2011 06:37 PM
Doesn't matter the question...the answer is ALWAYS 250 proXS

iron man 11-20-2011 07:33 PM
I said go Merc 200 but he just wants to go fast.

Wide Open 11-20-2011 08:04 PM
Soo he put an evinrude on it?

Montauk17 11-20-2011 08:06 PM
Quote:
Originally Posted by Wide Open (Post 352582)
Soo he put an evinrude on it?
Haha

weedeater 11-20-2011 08:15 PM
somethings just go together an Mercs and Bullets belong with each other

mcjaredsandwich 11-20-2011 08:18 PM
Quote:
Originally Posted by iron man (Post 352561)
I said go Merc 200 but he just wants to go fast.
http://i69.photobucket.com/albums/i7...nmanisdumb.jpg


All times are GMT -5. The time now is 03:10 PM.
Page 1 of 2 1 2
Show 50 post(s) from this thread on one page

Powered by vBulletin®
Copyright ©2000 - [ARG:3 UNDEFINED], Jelsoft Enterprises Ltd.
vB.Sponsors
All content, images, designs, and logos are Copyright © 2009-2012,
Salty Cajun, LLC
No unathorized use is permitted