Prop?
I recently changed the prop on my tohatsu 40. Now when I take off, if I'm not trimmed all the way down and accelerating the prop looses pull and sounds like its slipping. Is it possible that I put the thrust washer on the wrong way ?
|
Is it blowing out?
|
What do u mean blowing out?
|
Like it isn't gripping the water
|
These are the Picts of how it is together now
|
1 Attachment(s)
1st
|
1 Attachment(s)
2nd pict
|
1 Attachment(s)
3rd
|
1 Attachment(s)
4th
|
Looks right. Maybe there's not enough cup in your prop
|
Yes, it is blowing out
|
Need more cup. What prop did u put on?
|
It's a power tech 12p, it's what the guy from power tech recommended when I called
|
Sounds like you need more cup. Or your motor may be set too high for that prop
|
Does it do it when you take off trimmed all the way down?
|
1/5 times trimmed all the way down it will do it.
|
Sounds like its cavitating or not enough cup or pitch...I run a 14P on my 40....
|
What did you run before
|
13p factory aluminum prop
|
I run a 14 also on my tohatsu 40. What size boat it running on?
|
| All times are GMT -5. The time now is 03:13 PM. |
Powered by vBulletin®
Copyright ©2000 - [ARG:3 UNDEFINED], Jelsoft Enterprises Ltd.
vB.Sponsors
All content, images, designs, and logos are Copyright © 2009-2012,
Salty Cajun, LLC
No unathorized use is permitted