SaltyCajun.com

SaltyCajun.com (http://www.saltycajun.com/forum/index.php)
-   DIY Forum (http://www.saltycajun.com/forum/forumdisplay.php?f=67)
-   -   New build (http://www.saltycajun.com/forum/showthread.php?t=65296)

marshrunner757 08-26-2016 08:27 PM
New build
 
My newest build underway.
http://uploads.tapatalk-cdn.com/2016...29d5709ef8.jpghttp://uploads.tapatalk-cdn.com/2016...4e06384368.jpghttp://uploads.tapatalk-cdn.com/2016...38951c2485.jpg

Sent from my SAMSUNG-SM-G930A using Tapatalk

Andy C 08-26-2016 10:08 PM
That's nice!!

Broke Down 08-26-2016 11:57 PM
Looks good!

marshrunner757 08-27-2016 08:02 AM
Thanks guys. Almost done.

Sent from my SAMSUNG-SM-G930A using Tapatalk

marshrunner757 08-27-2016 04:20 PM
Done
http://uploads.tapatalk-cdn.com/2016...2c01dbef4a.jpg

Sent from my SAMSUNG-SM-G930A using Tapatalk

bjhooper82 08-27-2016 04:31 PM
That's nice! Did you torch it?

marshrunner757 08-27-2016 04:31 PM
Stained and sanded.

Sent from my SAMSUNG-SM-G930A using Tapatalk

redaddiction 08-27-2016 07:43 PM
Where did you find that burner setup? Everything i see comes attached with legs and such.

marshrunner757 08-27-2016 07:46 PM
Ordered the burner off Amazon and built the stand. Waiting on regulator and hose to come in now. 3 more to build before Christmas. [emoji4]

Sent from my SAMSUNG-SM-G930A using Tapatalk

Matt G 08-27-2016 08:50 PM
Dude that's awesome. It's giving me an idea for the stove I have on my porch. I wanted to build a 16" cabinet to hide the propane tank on one side and a 3' cabinet on the other for work space. This may work better because I can move it around if the wind is messing with my fire.

T and F fishing 09-02-2016 07:32 AM
Do you happen to have the link for the burner I'm looking into getting one possibly. Also did you have to use any kind of heat shield to protect the wood from the burner? I'm thinking about dropping a burner like that into a stainless table and don't know if I'd need to put some kind of heat shield to keep my table from getting hot.

DirtyD 09-02-2016 06:18 PM
I just got through making one for my back porch. I shielded the wood for mine using hardibacker board. Durock will work also. My burners were from Tejas smokers. The legs are detachable, so I can drop the burners in my island or take it with me to the camp. I'll try to post a pic later

marshrunner757 09-02-2016 08:35 PM
Quote:
Originally Posted by T and F fishing (Post 805727)
Do you happen to have the link for the burner I'm looking into getting one possibly. Also did you have to use any kind of heat shield to protect the wood from the burner? I'm thinking about dropping a burner like that into a stainless table and don't know if I'd need to put some kind of heat shield to keep my table from getting hot.
Sportsman DBCIS Double Burner Outdoor Cast Iron Propane Stove https://www.amazon.com/dp/B000N4MXYO..._mHIYxbGR9DPB5
I used sheet metal under and angle iron around edges.

Sent from my SAMSUNG-SM-G930A using Tapatalk

T and F fishing 10-04-2016 08:45 AM
Quote:
Originally Posted by marshrunner757 (Post 805820)
Sportsman DBCIS Double Burner Outdoor Cast Iron Propane Stove https://www.amazon.com/dp/B000N4MXYO..._mHIYxbGR9DPB5
I used sheet metal under and angle iron around edges.

Sent from my SAMSUNG-SM-G930A using Tapatalk
How is your burner sitting in there without the legs on it? Is it attached to the angle iron or just sitting on the sheet metal ?


All times are GMT -5. The time now is 10:19 PM.

Powered by vBulletin®
Copyright ©2000 - [ARG:3 UNDEFINED], Jelsoft Enterprises Ltd.
vB.Sponsors
All content, images, designs, and logos are Copyright © 2009-2012,
Salty Cajun, LLC
No unathorized use is permitted