SaltyCajun.com

SaltyCajun.com (http://www.saltycajun.com/forum/index.php)
-   Inshore Saltwater Fishing Discussion (http://www.saltycajun.com/forum/forumdisplay.php?f=4)
-   -   Boat Motor (http://www.saltycajun.com/forum/showthread.php?t=862)

Slickhunter 06-10-2009 11:12 AM

Boat Motor
 
Was out on the water yesterday comming back in from a uneventfull fishing trip with the ol lady, and my motor shuts down and temp light and horn start going off. Look back at my motor and it is barely pissing water and vibrating a lil more than normal. Trim up the motor to find a ice bag covering my water intake. Let the motor cool down for a lil while. Crank it back up and it runs fine. Question is...... Did this hurt my motor???????:pissed::pissed::pissed:

Deadly D 06-10-2009 11:16 AM

Quote:

Originally Posted by Slickhunter (Post 13322)
Was out on the water yesterday comming back in from a uneventfull fishing trip with the ol lady, and my motor shuts down and temp light and horn start going off. Look back at my motor and it is barely pissing water and vibrating a lil more than normal. Trim up the motor to find a ice bag covering my water intake. Let the motor cool down for a lil while. Crank it back up and it runs fine. Question is...... Did this hurt my motor???????:pissed::pissed::pissed:

did you shut down your motor or do you have a sensored device that does it

Slickhunter 06-10-2009 11:20 AM

Quote:

Originally Posted by Deadly D (Post 13323)
did you shut down your motor or do you have a sensored device that does it

I have a sensor device that slowed it down to idle speed and I had to idle over to the bank because the biggest ship I have ever seen was coming down the ship channel. But when I got out of its way I shut the motor off.

Deadly D 06-10-2009 11:25 AM

Quote:

Originally Posted by Slickhunter (Post 13324)
I have a sensor device that slowed it down to idle speed and I had to idle over to the bank because the biggest ship I have ever seen was coming down the ship channel. But when I got out of its way I shut the motor off.

probably not

flounder_smacker 06-10-2009 11:30 AM

when it went into guardian mode it kept it from over heating. if you had a water pressure gauge you could have stopped it before it over heated. always good to have a w/p gauge to see how good your pump is cooling off your motor. they are about 30 bucks and hook up easy.

wtretrievers 06-10-2009 11:32 AM

Shoudnt have hurt your motor at all. Thats what the alarms are for. They're set to go off before it gets to the point of damage.

Deadly D 06-10-2009 11:37 AM

Quote:

Originally Posted by flounder_smacker (Post 13328)
when it went into guardian mode it kept it from over heating. if you had a water pressure gauge you could have stopped it before it over heated. always good to have a w/p gauge to see how good your pump is cooling off your motor. they are about 30 bucks and hook up easy.

I agree with you but how many people look at their gauges while crussing the lake looking for birds or bait:confused:

bigdog 06-10-2009 11:38 AM

Quote:

Originally Posted by Deadly D (Post 13326)
probably not

I would look into purchasing a water pressure gauge for motor.
so next time your pressure drop you can catch it before it to late.

elebouef 06-10-2009 11:40 AM

Bet if your motor would of still been running that ship wouldn't of looked so big. :)

Also instead of a water pressure gauge you could have an air cool motor

Deadly D 06-10-2009 11:41 AM

Quote:

Originally Posted by elebouef (Post 13334)
Bet if your motor would of still been running that ship wouldn't of looked so big. :)

:*****::*****::*****:

Slickhunter 06-10-2009 01:06 PM

Hell no it didn't at the time. It dawned on me when the ol' lady was freaking out yelling. I work right by the Conoco docks and I have never seen a ship that big comming in.

And back to the ol' lady.... Figured I would get her some of that Berkly Gulp to fish with under a popping cork. I have never personally fished with it but the dang hard heads that bait catches.

Feesherman 06-10-2009 01:15 PM

I put a water pressure gauge on my motor. Now everyone at the launch is always yelling at me that my motor is not peeing.


All times are GMT -5. The time now is 11:57 PM.

Powered by vBulletin®
Copyright ©2000 - [ARG:3 UNDEFINED], Jelsoft Enterprises Ltd.
vB.Sponsors
All content, images, designs, and logos are Copyright © 2009-2012,
Salty Cajun, LLC
No unathorized use is permitted