bedding my rifle

[FF_T_Warren]

I have a rem 700P .308. its a sniper rifle. and what you do is take the barrel off the stock and take everything out of it(trigger, bolt, everything). then you fill all the holes around the action with putty. then you tape off all around the stock and you put epoxy in around where the action goes. you then set the barrel back into the stock and let the epoxy harden. one its hard you remove the barrel and trim away the excess.

all in all it cradles the action of the rifle better and improves accuracy as a result. I will also be painting it and replacing the trigger. but one thing at a time. I'll post pics when I get it finished.Ill try and post some before I paint and after. but I gotta get this done first and get it back together.