Has anyone switched out yama sws II props and hubs??

[redroaster]

42 mph on GPs or 36knots which matched up with speedometer and 5400 RPMs WOT
ken said its around 3 to 5 % slip ??? not sure i am saying this right?

cruising was 3900 RPM's and 30 mph or 26 knots on GPS

[redroaster]

prop numbers were:
17 TL
15 1/2

not sure if i told u correctly earlier

[meaux fishing]

Originally Posted by redroaster

42 mph on GPs or 36knots which matched up with speedometer and 5400 RPMs WOT
ken said its around 3 to 5 % slip ??? not sure i am saying this right?

cruising was 3900 RPM's and 30 mph or 26 knots on GPS

3-5% slip is really good, so raising your motors or trimming up more while you are running is probably your only option. A four blade will give you more hole shot, but reduce your top speed

[redroaster]

i will let u know. i am just mainly changing out props and hubs to stop chatter from those sws 11 props

[redroaster]

b

[redroaster]

ken at propgods.com is the man. went with 15 pitch merc enertia and thunderbolt hubs. no more clatter and better hole shot. if u have a prop issue, he can help