SaltyCajun.com http://www.gclendingservices.com//
MESSAGE BOARD Register Weather/Tides/Launches Store Go Premium! Sponsors Raffles

Notices

Go Back   SaltyCajun.com > Fishing Talk > Boating Talk
Reload this Page Hydrofoil

Boating Talk For discussion of everything related to boats and motors

Reply
 
Thread Tools Display Modes
  #1  
Old 02-22-2010, 10:26 AM
longsidelandry's Avatar
longsidelandry longsidelandry is offline
Swordfish
  
Join Date: Jul 2009
Location: Delcambre, LA
Posts: 6,749
Cash: 1,008
Default Hydrofoil
How well would one of these work on my boat? I have a 16' Alumacraft with a 60 Yamaha. I'm looking for something to help keep the boat out of the water a little more so I can run in a little shallower water. Would this help out?
Reply With Quote
  #2  
Old 02-22-2010, 10:49 AM
Dink's Avatar
Dink Dink is offline
Blue Marlin
  
Join Date: May 2009
Location: Lafayette
Posts: 7,768
Cash: 2,242
Default
Buy it and try it.....it helped on my old boat a lot! But on the little whaler, it made it uncontrollable! It picked the boat up so much, it would turn in a side wind.......VERY scary!!!
Reply With Quote
  #3  
Old 02-22-2010, 11:08 AM
longsidelandry's Avatar
longsidelandry longsidelandry is offline
Swordfish
  
Join Date: Jul 2009
Location: Delcambre, LA
Posts: 6,749
Cash: 1,008
Default
I'll probably end up doing that, my boat is so heavy at the back that I think it would end up picking it up just enough.
Reply With Quote
  #4  
Old 02-22-2010, 11:09 AM
Montauk17's Avatar
Montauk17 Montauk17 is offline
Great White
  
Join Date: Jul 2009
Location: Lafayette,LA
Posts: 10,803
Cash: 2,738
Default
They are a waste of money bro,you either need prop work or trim tabs. Those fins only help the boat from bouncing and helps a little with control. But these problems are either a prop issue or you may need trim tabs.
Reply With Quote
  #5  
Old 02-22-2010, 11:11 AM
longsidelandry's Avatar
longsidelandry longsidelandry is offline
Swordfish
  
Join Date: Jul 2009
Location: Delcambre, LA
Posts: 6,749
Cash: 1,008
Default
Quote:
Originally Posted by Montauk17 View Post
They are a waste of money bro,you either need prop work or trim tabs.
Trim tabs are out of the question, too much money. What would it run me to get prop work done?
Reply With Quote
  #6  
Old 02-22-2010, 11:12 AM
Feesherman Feesherman is offline
King Mackeral
  
Join Date: Jun 2009
Location: Moss Bluff
Posts: 2,658
Cash: 1,080
Default
Quote:
Originally Posted by Montauk17 View Post
They are a waste of money bro,you either need prop work or trim tabs.
Or a hook, which is free.
Reply With Quote
  #7  
Old 02-22-2010, 11:29 AM
Montauk17's Avatar
Montauk17 Montauk17 is offline
Great White
  
Join Date: Jul 2009
Location: Lafayette,LA
Posts: 10,803
Cash: 2,738
Default
Quote:
Originally Posted by longsidelandry View Post
Trim tabs are out of the question, too much money. What would it run me to get prop work done?
We can weld trim tabs on your boat for alot cheaper.
Reply With Quote
  #8  
Old 02-22-2010, 11:33 AM
longsidelandry's Avatar
longsidelandry longsidelandry is offline
Swordfish
  
Join Date: Jul 2009
Location: Delcambre, LA
Posts: 6,749
Cash: 1,008
Default
Quote:
Originally Posted by Montauk17 View Post
We can weld trim tabs on your boat for alot cheaper.
I already have some welded on there but would like to get a little higher if possible.
Reply With Quote
  #9  
Old 02-22-2010, 12:21 PM
Raymond's Avatar
Raymond Raymond is offline
Sailfish
  
Join Date: May 2009
Location: Lake Charles La
Posts: 4,217
Cash: 1,384
Default
Quote:
Originally Posted by longsidelandry View Post
I already have some welded on there but would like to get a little higher if possible.
Bend them down or bring them out more, should take care of some of the problem. You have way more motor than boat, how bout swapping your 60 for my 40 even steven?
Reply With Quote
  #10  
Old 02-22-2010, 12:24 PM
longsidelandry's Avatar
longsidelandry longsidelandry is offline
Swordfish
  
Join Date: Jul 2009
Location: Delcambre, LA
Posts: 6,749
Cash: 1,008
Default
Quote:
Originally Posted by R Little View Post
Bend them down or bring them out more, should take care of some of the problem. You have way more motor than boat, how bout swapping your 60 for my 40 even steven?
I can't bend them down because of the way they're made and welded onto the boat. As far as swapping goes.......ummm no lol, I can only get that boat up to 37 with nothing but me, the battery and 6 gal of gas.
Reply With Quote
  #11  
Old 02-22-2010, 01:33 PM
Montauk17's Avatar
Montauk17 Montauk17 is offline
Great White
  
Join Date: Jul 2009
Location: Lafayette,LA
Posts: 10,803
Cash: 2,738
Default
If your main problem is running in shallow water you would need a jack plate. I can get you a good deal on one if you want.
Reply With Quote
  #12  
Old 02-22-2010, 02:38 PM
jpeff31787's Avatar
jpeff31787 jpeff31787 is offline
Ling
  
Join Date: May 2009
Location: Carencro, La
Posts: 3,787
Cash: 2,321
Default
Quote:
Originally Posted by Montauk17 View Post
If your main problem is running in shallow water you would need a jack plate. I can get you a good deal on one if you want.
what kind of deal are you talking about
Reply With Quote
  #13  
Old 02-22-2010, 03:10 PM
Montauk17's Avatar
Montauk17 Montauk17 is offline
Great White
  
Join Date: Jul 2009
Location: Lafayette,LA
Posts: 10,803
Cash: 2,738
Default
Quote:
Originally Posted by jpeff31787 View Post
what kind of deal are you talking about
What size boat/motor?
Reply With Quote
  #14  
Old 02-22-2010, 03:31 PM
longsidelandry's Avatar
longsidelandry longsidelandry is offline
Swordfish
  
Join Date: Jul 2009
Location: Delcambre, LA
Posts: 6,749
Cash: 1,008
Default
Quote:
Originally Posted by Montauk17 View Post
What size boat/motor?
What would one run for mine? 16' 60 hp
Reply With Quote
  #15  
Old 02-22-2010, 04:02 PM
Dink's Avatar
Dink Dink is offline
Blue Marlin
  
Join Date: May 2009
Location: Lafayette
Posts: 7,768
Cash: 2,242
Default
Quote:
Originally Posted by Montauk17 View Post
They are a waste of money bro,you either need prop work or trim tabs. Those fins only help the boat from bouncing and helps a little with control. But these problems are either a prop issue or you may need trim tabs.


From experience, they make a big difference. Old boat would porpoise without it. Little whaler is WAY out of the water with it.......Hull is only 300lb, that may make a difference, not sure
Reply With Quote
  #16  
Old 02-22-2010, 04:12 PM
adamsfence's Avatar
adamsfence adamsfence is offline
King Mackeral
  
Join Date: May 2009
Location: oakdale
Posts: 2,884
Cash: 1,102
Default
Quote:
Originally Posted by Dink View Post
From experience, they make a big difference. Old boat would porpoise without it. Little whaler is WAY out of the water with it.......Hull is only 300lb, that may make a difference, not sure

I had a 17' bass boat with a 135 that would fly. I had to have one so when i was running top end i could control it as far as picking the boat up i didn't notice a difference. but i wasn't paying attention. I will say it made a big difference in hole shot and stability while running
Reply With Quote
Reply

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 08:11 PM.


Contact Us - Louisiana's Best Fishing, Hunting, and Outdoors Forum - New Posts - Mobile - Archive - Privacy - Terms - Top

Powered by vBulletin®
Copyright ©2000 - [ARG:3 UNDEFINED], Jelsoft Enterprises Ltd.
vB.Sponsors
vBCredits v1.4 Copyright ©2007 - 2008, PixelFX Studios
SaltyCajun.com logo provided by Bryce Risher

All content, images, designs, and logos are Copyright © 2009-2012,
Salty Cajun, LLC
No unathorized use is permitted
Geo Visitors Map