Boating Talk: Haynie Boats..Talk to me

"W" Haynie Boats..Talk to me 07-11-2009, 03:09 PM

LaAngler the Z21 would be my choice for big lake not those flats... 07-11-2009, 03:11 PM

Deadly D Bruce W has to have low sides to sling them 12" trout or... 07-11-2009, 03:15 PM

"W" From what I was reading those flats can handle some good... 07-11-2009, 03:24 PM

Jay Now your talking that boat is made right down the road from... 07-11-2009, 03:18 PM

Hopedale Hustler yaa them flat models take an azz whuppin....i know a guy... 07-11-2009, 03:30 PM

"W" Yellowfin 24ft is about 70,000 That's OUT!!!!:D 07-11-2009, 03:35 PM

speckdaddy hey dubya, not tryin ta jack ya thread but did ya ever look... 07-11-2009, 03:49 PM

Hopedale Hustler yaaa uuu rigght... 07-11-2009, 05:33 PM

speckdaddy nice boats w, with the jack plate and the optional tunnel... 07-11-2009, 03:46 PM

flounder_smacker hewes are sweet. i have an 18 redfisher and run vbay all... 07-11-2009, 04:43 PM

LaAngler W as much as you like to fish with bigger groups of people... 07-11-2009, 07:06 PM

huntin fool he aint got enuf truck to pull it! he got a dang chevy, he... 07-11-2009, 07:10 PM

Jay That ain't right :rotfl::shaking::rotfl: 07-11-2009, 07:21 PM

Deadly D Fool you better watch it you might have to get a new... 07-11-2009, 07:51 PM

Reel Bender LMAO. Good one Fool!! 07-11-2009, 08:18 PM

huntin fool i figured you texans would like that.. W what... 07-11-2009, 08:39 PM

Salty He's gonna put the 30 off the 1200cc on it. :) 07-11-2009, 08:41 PM

More replies below current depth...

"W" Im sure I will get a 22ft......Just dont like hauling that... 07-11-2009, 07:12 PM

Reel Bender Shhot that be a Houseboat for a guy like him, heck he could... 07-11-2009, 08:20 PM

FlatoutFishin Capt Aubrey Black fishes a Haynie down in Baffin...nice... 07-11-2009, 08:30 PM

Reel Bender He'd probably give some good input, it gets pretty rough... 07-11-2009, 08:32 PM

More replies below current depth...

FlatoutFishin Above and below the waterline! Believe he's had a few lower... 07-11-2009, 08:36 PM

More replies below current depth...

Jay I found your boat "W" ... 07-12-2009, 08:40 AM

Big Kahunaz W....did you see on the site what they use in the stringer... 07-12-2009, 11:59 AM

LaAngler looks like some treated plywood for some of the decks and... 07-12-2009, 03:15 PM

Salty Why would somebody want this type boat to fish Big lake?... 07-12-2009, 03:19 PM

Big Kahunaz exactly...get that Frontier, Triton, or better... 07-12-2009, 03:26 PM

Capt. Ryan Rachunek Stay in LA, Haynie doesn't take FEMA cards......... 07-12-2009, 03:47 PM

Big Kahunaz ARE you sure?:confused: 07-12-2009, 03:58 PM

Salty :spineyes: 07-12-2009, 05:28 PM

"W" They said FEMA expired but they are taking Stimulus... 07-12-2009, 07:55 PM

Reel Bender I think he got the link wrong try this ... 07-12-2009, 05:54 PM

LaAngler ha 07-12-2009, 08:05 PM

huntin fool thats what my boat looks like every weekend bruce! 07-12-2009, 08:10 PM

LaAngler ? 07-12-2009, 08:12 PM

"W" 13year olds.......... He said he had the hots for Austins... 07-12-2009, 08:15 PM

huntin fool nooo..atleast i dont sit there and check the girls out that... 07-12-2009, 08:16 PM

Deadly D he got you on that one W:lmfao::lmfao:you sick puppy 07-12-2009, 08:21 PM

bigdog If that is heaven, I would walk cross water to get... 07-12-2009, 08:13 PM

fishinpox im gonna have to agree my friend!! 07-12-2009, 09:15 PM

"W" You want to see sick....Just wait...Im going to but a... 07-12-2009, 08:10 PM

LaAngler LMAO yea U right 07-12-2009, 08:15 PM

LaAngler it's the wharf fool 07-12-2009, 08:25 PM

huntin fool its my good looks, and my boat. anyways, W you... 07-12-2009, 08:27 PM

Red Devil a trolling motor fool 07-12-2009, 09:21 PM

"W" Biggest they will put on a 22ft....It will be a YammaHammer... 07-12-2009, 09:24 PM

cmdrost 24 HO or the z21 models are great for big lake. Don't let... 07-13-2009, 08:06 AM

"W" Look OUT Oct... 07-13-2009, 02:18 PM

cmdrost just my opinion, but everyone I've talked to said the... 07-13-2009, 02:31 PM

"W" Its rated for a 225 you think that 150 would handle... 07-13-2009, 02:35 PM

cmdrost 150 would push it good. I cruise at about 36 and top out... 07-13-2009, 02:44 PM

all star rod CMDROST, I agree with you. The Yamaha 200 4 stroke is... 07-13-2009, 02:54 PM

LaAngler 225 opti on the Z21 no doubt boat is designed with a... 07-13-2009, 03:03 PM

all star rod If you are going to go with a 2 stroke I would go with the... 07-13-2009, 03:07 PM

Jay I would put the 225 optimax for sure. 07-13-2009, 04:49 PM

Natural Light Kid i'm going to show my ignorance. i never heard of haynie... 07-13-2009, 05:32 PM

"W" Change your avatar and we might tell yea:rolleyes: 07-13-2009, 07:53 PM

Reel Bender The same reason tha makes everything else he uses good!!!!!... 07-13-2009, 07:56 PM

Deadly D Jay I agree with you on the opitimax. Better hole shot... 07-13-2009, 08:11 PM

FlatoutFishin Screw the Haynie....I think you need an SCB! :smokin: 07-13-2009, 09:18 PM

Reel Bender Small Can Boat? That be a Pirot would 'nt it? 07-13-2009, 09:27 PM

More replies below current depth...

"W" don't think so!!! 07-13-2009, 09:33 PM

FlatoutFishin How you gonna keep up? 07-13-2009, 09:40 PM

all star rod Natural good question...I am not sure how much they run in... 07-13-2009, 09:23 PM

all star rod W why you not getting another SEA... 07-13-2009, 09:59 PM

Salty So far...it's a known fact that: Sea Fox is the "best"... 07-13-2009, 10:23 PM

LaAngler you'll have to source the sea fox claim, i don't remember... 07-13-2009, 10:26 PM

Salty He has one so it's the "best". You should know...you... 07-13-2009, 10:44 PM

all star rod LaAngler that one may have a DISCLAIMER!!:lmfao::lmfao: 07-13-2009, 10:35 PM

LaAngler no that was ryan and you 07-13-2009, 11:21 PM

LaAngler boat 07-20-2009, 01:27 PM

cmdrost that boat just looks fast! 07-20-2009, 01:29 PM

"W" If everything goes right I will get the Z21 just not sold... 07-20-2009, 01:38 PM

cmdrost speed is good for long runs in the ship channel. Yamaha... 07-20-2009, 01:49 PM

LaAngler z21 07-20-2009, 02:51 PM

MERCURY OUTBOARD MAN The plastic lids and cleats are an option we do use... 07-22-2009, 06:20 PM

all star rod If you are looking at getting a Yamaha go on their web site... 07-20-2009, 05:42 PM

MERCURY OUTBOARD MAN The z 21 with 225 proxs will run 4 mph over rpm 07-22-2009, 06:23 PM

Hopedale Hustler it looks like a POS mako. 07-20-2009, 06:08 PM

Deadly D Allways get what the boat is rated for. The boat performs... 07-20-2009, 07:37 PM

all star rod Nothing wrong with putting the MAX H.P...but do you really... 07-20-2009, 07:51 PM

Deadly D I only know 4 that are rated for 300 and they all have 300.... 07-20-2009, 07:56 PM

all star rod 4??? Look at these 24' bay boats manufacutres on their web... 07-20-2009, 08:08 PM

Deadly D well you are correct to some degree but horsepower ratings... 07-20-2009, 08:18 PM

all star rod Well if a 24' has a HP range of 100HP then why don't a 22'... 07-20-2009, 09:03 PM

LaAngler bottom line is that this boat with a light fishing load... 07-20-2009, 09:52 PM

all star rod My Xpress X22 Bay boat which has a dry weight of 1,700#... 07-20-2009, 10:10 PM

Hopedale Hustler just get a yellow fin 24 bay..slap that new 350 yammy on... 07-20-2009, 10:18 PM

huntin fool WOW :eek: 07-20-2009, 10:34 PM

Capt. Ryan Rachunek Has Reddy ever owned a boat with triple digit power???? ... 07-21-2009, 09:09 AM

FREON sure he has...I heard his next to last boat had 9 1/2... 07-21-2009, 01:14 PM

"W" All ME RIght HERE..... 07-21-2009, 04:32 PM

Hopedale Hustler sure it wasnt just the one you heard....my cousin runs one... 07-21-2009, 04:37 PM

More replies below current depth...

Capt. Ryan Rachunek I was on a boat with twin 350's, don't know if it makes a... 07-22-2009, 09:04 AM

all star rod Big suprise....a 24' bay boat rated for more than a... 07-20-2009, 10:21 PM

redspeck82 I have no clue? But i was wondering what makes these boat... 07-21-2009, 05:56 PM

"W" #1 I want a boat no body on our lake has....only seen one... 07-21-2009, 06:13 PM

huntin fool you gunna get a power pole too?? 07-21-2009, 06:15 PM

Reel Bender With as much pooh as you fling, you might want to consider... 07-22-2009, 03:44 PM

"W" Back Back Give ME 50Feet 07-22-2009, 03:51 PM

"W" This pic is stripped down you add what you want!! Custom... 07-21-2009, 06:50 PM

Ray Where do you keep the croakers????? 07-21-2009, 06:54 PM

Reel Bender Center Hatch in back, notice the SS intake Screen bootom... 07-21-2009, 06:57 PM

Ray I was jerkin' "W"s chain. 07-21-2009, 07:30 PM

Reel Bender I know;) So was I!!:D 07-21-2009, 07:34 PM

all star rod What does this boat cost for example with a 150 4 stroke... 07-21-2009, 09:12 PM

"W" Will have a price tomorrow...loaded out with a 225 Opti max... 07-21-2009, 09:16 PM

Salty W doesn't need a "GPS/Fishfinder". He knows where to go to... 07-21-2009, 10:08 PM

huntin fool there installing a special gps/BIRD FINDER... 07-21-2009, 10:14 PM

all star rod Good luck going with the Optimax..... I would get a HPDI... 07-21-2009, 09:32 PM

MERCURY OUTBOARD MAN Yes HAYNIE is the biggest mercury dealer in texas we are... 07-22-2009, 06:31 PM

"W" I want a 4 stoke yammy....just getting a price with... 07-21-2009, 09:43 PM

cmdrost Get the 24HO with 250 4 stroke yammy! 07-22-2009, 03:39 PM

LaAngler the fly by wire verado 350 supposed to be better 07-22-2009, 09:08 AM

Hopedale Hustler the only problem with that is its a Mercury.....mite be... 07-22-2009, 07:05 PM

redspeck82 Yea and the verado 350 is a V-6 insted of a V-8 so it might... 07-22-2009, 09:11 AM

SULPHITE W I think there is a haynie boat hanging at spicers... 07-22-2009, 10:43 AM

cmdrost that is/was Stansels boat. I think he sold it already. ... 07-22-2009, 02:46 PM

SULPHITE yep thats it... 07-22-2009, 03:01 PM

MERCURY OUTBOARD MAN i dont know were you are at but in lake charles there is... 07-22-2009, 06:08 PM

"W" That's what I want z21 with the 150 yammy 4 stroke!!! 07-22-2009, 07:59 PM

Reel Bender That is probably too Much boat for a little guy like you... 07-22-2009, 08:15 PM

Salty Bender, that one's bigger than the one he's got now. :eek: 07-22-2009, 08:19 PM

Reel Bender I know, I figured it would be a step up!!! 07-22-2009, 08:20 PM

cmdrost mercury man..... How does the z21 perform with the... 07-23-2009, 08:26 AM

"W" I talked to him on PM and he said the Yammy 150 would push... 07-23-2009, 11:41 AM

Capt. Ryan Rachunek You've obviously never been on a Merc powered Haynie....... 07-23-2009, 12:47 PM

Salty The guide I fished with in S. Texas had a Mercury-powered... 07-23-2009, 08:22 PM

"W" Im not trying to fly...just fish:rotfl::rotfl: 07-23-2009, 08:27 PM

Jay I'm going out on a limb here. There is only one 2 stroke... 07-23-2009, 06:09 PM

all star rod Merc....will fly into the boat shop for a monthly... 07-24-2009, 02:11 PM

LaAngler i've ran mercs for years with no problems a 2 1/4 opti... 07-24-2009, 03:26 PM

Deadly D [QUOTE=LaAngler;26064] he will be crying after he gets... 07-24-2009, 03:30 PM

Ray I saw a very nice looking Shearwater in Big Lake yesterday... 07-24-2009, 02:19 PM

Salty Meeshigun 07-24-2009, 07:55 PM

Montauk17 I ride in boats daily and trust me,you dont want a 150... 07-24-2009, 10:46 PM

Raymond I thought the same thing but, it is actually Mississippi. 07-28-2009, 09:27 PM

Capt. Ryan Rachunek MS is the abbreviation for Mississippi..... Here is... 07-29-2009, 08:44 AM

Raymond Not on Boats, brother lives in Greenville Ms and all of the... 07-29-2009, 09:26 AM

all star rod Ray I saw it too as I was leaving the landing. It was... 07-24-2009, 03:04 PM

"W" About $70 rigged out 07-24-2009, 03:10 PM

"W" This is what im going to power it with.... 07-24-2009, 03:14 PM

all star rod He will be crying when that storm is coming and that MERC... 07-24-2009, 04:06 PM

"W" NOW THAT FUNNY RIGHT THERE:lmfao::lmfao::lmfao::lmfao:........ 07-24-2009, 04:09 PM

LaAngler i had a fairly late model 25 merc i thought it sucked ... 07-24-2009, 04:20 PM

Deadly D U right ever since they got awawy from the chrome cylinder... 07-24-2009, 06:45 PM

huntin fool game wardens run a merc something...dont know wether it was... 07-24-2009, 07:23 PM

all star rod Really if I ever owned a MERC it would be an Optimax. I... 07-24-2009, 04:28 PM

all star rod W did you ever find out what that 21' Haynie runs with a... 07-26-2009, 06:52 PM

"W" 29,000 to 35,000 07-26-2009, 07:15 PM

Ray I have a 19' Cobia bay boat with a 150 Yahama 4 stroke. It... 07-26-2009, 07:12 PM

Ray Plus taxes and registration? I live in Lake Charles(9%... 07-26-2009, 07:27 PM

"W" Thats just some base prices.....I havent got all the... 07-26-2009, 07:32 PM

Deadly D Thats what Im talking about. I might start fishing with you... 07-26-2009, 07:37 PM

Natural Light Kid that's one of the nice things about getting a used rig! :) 07-27-2009, 02:24 PM

boatdriver Optimax 07-28-2009, 05:27 PM

Deadly D How does a Haynie compare to the Blackjack 22' model 07-28-2009, 06:03 PM

boatdriver Comparison... 07-30-2009, 12:53 PM

all star rod W was the 225 Opti more $ than the best outboard ever made:... 07-26-2009, 07:41 PM

"W" I dont know that for sure.....We havnt talked about the... 07-26-2009, 07:53 PM

all star rod Rule #1 when you buy a boat get everything you need at the... 07-26-2009, 08:00 PM

LaAngler wonder what kind of buy 2 boats discount they would give ... 07-26-2009, 09:46 PM

"W" Once I get to talk to him ...I will make my mind up on the... 07-26-2009, 10:01 PM

Deadly D You wont be disatisfied with the optima Im telling you. Ill... 07-26-2009, 10:05 PM

MERCURY OUTBOARD MAN I dropped kenner 2 years ago tracker marine just dont build... 07-29-2009, 11:13 PM

cmdrost "tracker marine just dont build them like bill kenner did"... 07-30-2009, 08:54 AM

Ray In my opinion, I would not get a boat with wood in it,... 07-30-2009, 01:04 PM

MERCURY OUTBOARD MAN The wood we use is called boat panel you can not buy at... 08-05-2009, 08:57 PM

LaAngler good information here 08-05-2009, 09:41 PM

cmdrost Bill Kenner told me at the last boat show that a 24... 07-30-2009, 01:26 PM

boatdriver 2010 07-30-2009, 02:48 PM

Ray I keep a Chris Craft boat at Olmsted Shipyard in a boat... 08-05-2009, 09:19 PM

"W" Talked to Chris today....These boats are the real... 08-12-2009, 08:28 PM

BigCoon Are you still getting the boat after Cora found out about... 08-13-2009, 11:19 AM

LaAngler quiksilver baby, merc all the way jet black helps you... 08-13-2009, 12:03 PM

Ray Those are some pretty light boats for a 21 ft'er. I bet it... 08-13-2009, 12:30 PM

"W" 65mph!!!!:p 08-13-2009, 08:02 PM

Austin(boatman\'s son) what size motor? 08-14-2009, 03:29 PM

Austin(boatman\'s son) dubya is really gonna hop the waves now haha 08-14-2009, 03:30 PM

SULPHITE HERE 08-14-2009, 03:30 PM

Austin(boatman\'s son) Yup, it will cruise. Dubya gunna look like a kid in that... 08-14-2009, 10:01 PM

Montauk17 Wood in a boat is not a bad thing at all if it's done... 08-14-2009, 10:12 PM

all star rod The boat will not be an issue.....I would be more worried... 08-15-2009, 09:05 AM

Austin(boatman\'s son) Nothing wrong with a merc!!! :shaking: 08-15-2009, 03:13 PM

Ray I agree. I had fantastic luck with the two I had. 08-15-2009, 03:29 PM

huntin fool how ya know that nothing is wrong with mercs? how many... 08-15-2009, 03:39 PM

Austin(boatman\'s son) doesnt matter how many i ran, i do research :shaking: 08-15-2009, 04:03 PM

Hopedale Hustler its amazing how long this thread has lasted and prety much... 08-15-2009, 03:35 PM

Ray That 21 ft. Haynie weighs 1400 lbs. dry. My 19 ft. Cobia... 08-15-2009, 03:54 PM

evis102 Z21 with a Merc 250XS(not the pro), Bucket seats, Short... 09-11-2009, 10:52 PM

evis102 http://i86.photobucket.com/albums/k110/Shroomtip/Picture2045... 09-12-2009, 02:59 AM

huntin fool WOW. all i can say 09-12-2009, 09:04 AM

LaAngler now that is a fine boat 09-12-2009, 09:17 AM

Welcome to SaltyCajun.com!

It appears that you have not yet registered with us, or you are not logged in.
Please REGISTER and/or login to avoid seeing this annoying message.
Registration is free, and just may help save the world! :)

Welcome to SaltyCajun.com!

It appears that you have not yet registered with us, or you are not logged in.Please REGISTER and/or login to avoid seeing this annoying message.Registration is free, and just may help save the world! :)

It appears that you have not yet registered with us, or you are not logged in.
Please REGISTER and/or login to avoid seeing this annoying message.
Registration is free, and just may help save the world! :)