Let's see your Jon boat

[CajunChristian]

The trim switches are on the steering wheel. The switch to the left is for a Bob's hydraulic lift plate. It's a 20" shaft motor, I can run it up to 29" total height. In fact, that's how I get up in the marsh. If it's too shallow to just jump on plane, I'll raise the lift plate to it's full extension, 29", then stab the throttle. The motor bounces on the rev limiter at 6250, as soon as the boat lunges forward, I'll hit the down button on the lift and away we go.
The steering was a double cable setup, I have since switched it to a single cable steering. I thought I would need the double cable setup for steering torque, but the motor has zero torque at any speed
D