SaltyCajun.com http://redtunashirtclub.com/
MESSAGE BOARD Register Weather/Tides/Launches Store Go Premium! Sponsors Raffles

Notices

Go Back   SaltyCajun.com > Fishing Talk > Boating Talk
Reload this Page Trolling motor problem

Boating Talk For discussion of everything related to boats and motors

Reply
 
Thread Tools Display Modes
  #1  
Old 03-08-2013, 09:31 PM
ccm ccm is offline
Flounder
  
Join Date: May 2011
Location: Shreveport, LA
Posts: 75
Cash: 805
Default Trolling motor problem
Hi,
I have a 2006 MinnnKota Riptide 101 hand operated saltwater trolling motor that is beginning to give me some intermittent problems. I have a floor mounted on/off switch and sometimes when I step on the switch the motor does not turn on. When that happens I can hear a slight clicking noise. Can't tell for sure if the noise is coming from the switch or the head of the trolling motor.

Do you think I have a bad switch or something more sinister?

Thanks in advance for the advice.

Charlie
Reply With Quote
  #2  
Old 03-08-2013, 09:43 PM
Hydro's Avatar
Hydro Hydro is offline
King Mackeral
  
Join Date: Jan 2011
Location: Lake Charles
Posts: 2,123
Cash: 5,104
Default
Bypass the foot switch and see what happens ...

Hydro
Reply With Quote
  #3  
Old 03-08-2013, 09:56 PM
PaulMyers's Avatar
PaulMyers PaulMyers is offline
Super Moderator
  
Join Date: Aug 2010
Location: Moss Bluff, LA
Posts: 10,057
Cash: 18,814
Default
Those foot switches do go bad. They are also the easiest thing to check.
Reply With Quote
  #4  
Old 03-09-2013, 09:21 AM
ccm ccm is offline
Flounder
  
Join Date: May 2011
Location: Shreveport, LA
Posts: 75
Cash: 805
Default
Quote:
Originally Posted by Hydro View Post
Bypass the foot switch and see what happens ...

Hydro
Are you saying I should remove the switch and connect the wires so the motor is constantly on and then turning the motor on and off using the variable speed control handle? I have never removed the switch, does it only have two wires?

Hydro, I appreciate your reply and advice.

Charlie
Reply With Quote
  #5  
Old 03-09-2013, 10:45 AM
ccm ccm is offline
Flounder
  
Join Date: May 2011
Location: Shreveport, LA
Posts: 75
Cash: 805
Default
OK guys, I finally had time to listen to the clicking noise, in a quiet environment, and have determined that the noise is coming from the head of the trolling motor rather than from the switch.

So now my question is....is this noise normal, and I just have never noticed it, or do I have a problem?

Thanks again for any advice you can offer.

Charlie
Reply With Quote
  #6  
Old 03-09-2013, 01:36 PM
Hydro's Avatar
Hydro Hydro is offline
King Mackeral
  
Join Date: Jan 2011
Location: Lake Charles
Posts: 2,123
Cash: 5,104
Default
Quote:
Originally Posted by ccm View Post
Are you saying I should remove the switch and connect the wires so the motor is constantly on and then turning the motor on and off using the variable speed control handle? I have never removed the switch, does it only have two wires?

Hydro, I appreciate your reply and advice.

Charlie
The switch is an add on, spliced in series to the TM on the positive lead...

You should be able to dig around and see where it was spliced in...

Hydro
Reply With Quote
  #7  
Old 03-09-2013, 06:35 PM
Gerald Gerald is offline
Sailfish
  
Join Date: May 2009
Location: Lake Charles / Moss Bluff
Posts: 4,648
Cash: 4,232
Default
Quote:
Originally Posted by ccm View Post
OK guys, I finally had time to listen to the clicking noise, in a quiet environment, and have determined that the noise is coming from the head of the trolling motor rather than from the switch.

So now my question is....is this noise normal, and I just have never noticed it, or do I have a problem?

Thanks again for any advice you can offer.

Charlie
IMO.....no the noise is not normal. Several years ago, I heard a "crackling" type sound coming from the head of my trolling motor. It made this noise for 10-15 seconds and then the trolling motor stopped working.

The circuit board inside the head had fried. This TM board also directly connected to the handle. I bought the part [circuit board & handle] on line for $ 100 [$125 locally] and changed it myself.
Reply With Quote
  #8  
Old 03-18-2013, 12:09 PM
Catcher'sMitt's Avatar
Catcher'sMitt Catcher'sMitt is offline
Redfish
  
Join Date: Sep 2011
Location: Baton Rouge, LA
Posts: 228
Cash: 994
Default
it is time to go through your connections. You will probably see that you have good voltage, put you are probably not getting the amps you need because of a bad connection. and the bad connection could be anywhere from the battery to the wires in the trolling motor.

I had mine, at one time, connected with 3 foot switches. It was a nightmare trying to keep it running on all the switches. I don't have any right now. I am contemplating adding one......

I spend a cool fortune keeping my motor guide running. One time it was the butt connector in the head. If you haven't went through all the connections lately, I would start there. check voltage first, if you have a way to load test the amps, do that too. then go through all the connections. take apart, clean and lube and put back. when you have gone through them all. retake readings and try it out. The clicking will probably be gone. BTW you need over 36.5 volts for it to work without a hitch. At least my motorguide is finicky with low voltage.
Reply With Quote
  #9  
Old 03-18-2013, 12:43 PM
bgizzle's Avatar
bgizzle bgizzle is offline
Sailfish
  
Join Date: Jun 2011
Location: broussard,La
Posts: 4,526
Cash: 5,646
Default
That switch having bad contact will do that in a way. It's not giving your TM a full 12/24v because of the contacts. Test the wire going into your plug with a meter and then from plug to switch and then step on switch and test from switch to tm. Another way is charge your batteries and if the TM has the battery meter check on it then check it and see if its showing a full charge. If not your battery(s) may be bad or dead cell not giving your TM full continuity at all times
Reply With Quote
  #10  
Old 03-18-2013, 02:42 PM
davidkyle323's Avatar
davidkyle323 davidkyle323 is offline
Redfish
  
Join Date: Mar 2012
Location: Bell City
Posts: 124
Cash: 649
Default
Mine was doing that same exact thing today while fishing! I cut the foot push button off and taped the wires together and it worked fine for the rest of the day! Hope this helps
Reply With Quote
  #11  
Old 03-30-2013, 08:06 PM
ccm ccm is offline
Flounder
  
Join Date: May 2011
Location: Shreveport, LA
Posts: 75
Cash: 805
Default Thanks
Thanks to everyone for the advice.

Charlie
Reply With Quote
  #12  
Old 03-30-2013, 08:07 PM
PaulMyers's Avatar
PaulMyers PaulMyers is offline
Super Moderator
  
Join Date: Aug 2010
Location: Moss Bluff, LA
Posts: 10,057
Cash: 18,814
Default
Quote:
Originally Posted by ccm View Post
Thanks to everyone for the advice.

Charlie
What was the fix?
Reply With Quote
  #13  
Old 03-30-2013, 09:02 PM
hadabite's Avatar
hadabite hadabite is offline
Trophy Trout
  
Join Date: May 2009
Location: Lake Charles
Posts: 279
Cash: 1,030
Default
mines an 07 and im on my 3rd big foot. thats prob what it is. like everybody said its the easiest to check first
Reply With Quote
  #14  
Old 03-30-2013, 09:05 PM
FF_T_Warren's Avatar
FF_T_Warren FF_T_Warren is offline
Ling
  
Join Date: Jun 2009
Location: Walker, LA
Posts: 3,024
Cash: 1,338
Default
check your wiring up to the tm. ours ended up being our plug on the bow. had to change male and female sides. ours was doing the exact same thing you talking about.
Reply With Quote
  #15  
Old 03-31-2013, 08:26 AM
ccm ccm is offline
Flounder
  
Join Date: May 2011
Location: Shreveport, LA
Posts: 75
Cash: 805
Default
Quote:
Originally Posted by PaulMyers View Post
What was the fix?
Sorry, I should have told everyone the fix. I have fished a number of times since my original post and have had no problems with the trolling motor switch. My conclusion was that when the problem first appeared I think the boots I was wearing had pretty aggressive soles and I was not making good contact with the switch. After listening to the switch in a quiet environment I was able to still hear the clicking noise but the switch worked every time I pressed it by hand. The comments from some of the responses is that the clicking noise is normal. I had never noticed the noise on the water because it was never quiet enough to hear it.

Thanks again for everyone who took time to offer advice. This forum is a great source of information.

I hope all of you have a great Easter.

Charlie
Reply With Quote
  #16  
Old 03-31-2013, 10:09 AM
Clampy's Avatar
Clampy Clampy is offline
Ling
  
Join Date: Jun 2011
Location: The Flats
Posts: 3,509
Cash: 5,650
Default
God I hate big foot switches
Reply With Quote
  #17  
Old 03-31-2013, 11:26 AM
bgizzle's Avatar
bgizzle bgizzle is offline
Sailfish
  
Join Date: Jun 2011
Location: broussard,La
Posts: 4,526
Cash: 5,646
Default
Quote:
Originally Posted by Clampy View Post
God I hate big foot switches
U have one on urs? Lol. Hahhhaaa
Reply With Quote
  #18  
Old 03-31-2013, 02:44 PM
Clampy's Avatar
Clampy Clampy is offline
Ling
  
Join Date: Jun 2011
Location: The Flats
Posts: 3,509
Cash: 5,650
Default
Quote:
Originally Posted by bgizzle View Post
U have one on urs? Lol. Hahhhaaa
Its by passed! Worm!
Reply With Quote
  #19  
Old 03-31-2013, 02:52 PM
bgizzle's Avatar
bgizzle bgizzle is offline
Sailfish
  
Join Date: Jun 2011
Location: broussard,La
Posts: 4,526
Cash: 5,646
Default
Quote:
Originally Posted by Clampy View Post
Its by passed! Worm!
That may be the problem with your Tm. Need more big foot! Big foot or bust. I fish alot solo! It's great for me. I love it.
Reply With Quote
  #20  
Old 03-31-2013, 07:15 PM
Clampy's Avatar
Clampy Clampy is offline
Ling
  
Join Date: Jun 2011
Location: The Flats
Posts: 3,509
Cash: 5,650
Default
No my charger is burnt. No big foot and that's one less thing you gotta fix later. Pointless if you ask me.
Reply With Quote
Reply

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 04:04 PM.


Contact Us - Louisiana's Best Fishing, Hunting, and Outdoors Forum - New Posts - Mobile - Archive - Privacy - Terms - Top

Powered by vBulletin®
Copyright ©2000 - [ARG:3 UNDEFINED], Jelsoft Enterprises Ltd.
vB.Sponsors
vBCredits v1.4 Copyright ©2007 - 2008, PixelFX Studios
SaltyCajun.com logo provided by Bryce Risher

All content, images, designs, and logos are Copyright © 2009-2012,
Salty Cajun, LLC
No unathorized use is permitted
Geo Visitors Map