|
|
|
|
|||||||
| Boating Talk For discussion of everything related to boats and motors |
|
|
Thread Tools | Display Modes |
|
#4
06-29-2013, 01:20 PM
|
|||
|
|||
Welding shop will lift up the boat [if needed] with an overhead hoist.....weld it and set it back on the trailer.
The aluminum weld "gun" is fairly large and can not fit into tight spots. Welding from the bottom is usually not a problem, if they can get to the spot. 
|
| Bookmarks |
|
|
Threaded Mode