![]() |
|
|
|
|||||||
| General Discussion (Everything Else) Discuss anything that doesn't belong in any other forums here. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
http://www.gpsvisualizer.com/draw/
Click the ruler in the bottom left hand corner. Then select the box. Draw lines around the property lines it will highlight the area between the lines and give you the acreage. Doesn't seem to work on my phone. I use it on computer all the time. |
|
#2
|
|||
|
|||
|
There are 43,560 square feet in an acre.
L x W= area 3000 ft. x 2900 ft. = 8,700,000 sq. ft./43,560 =199.7 acres This can be used to find the area, thus the acreage on any piece of property that is square or rectangle. Other formulas are used to find area for a triangle, circle, or something four sided, with different lengths of the sides. I would say this is the most accurate for calculating the acreage, if the l and w are correct. The others were you lay out the lines will get you close, but not accurate, imo. Last edited by H2OFwlKlr; 03-20-2014 at 06:34 AM. |
![]() |
| Bookmarks |
|
|
