Well, we finally got some white on the outside of the boat! First two coats of GelCoat finished on the outside, and I'm super happy about how everything is turning out!
And then in between coats on the hull, we went ahead and shot some Gelcoat on the motor box.
We didn't get all four coats on, just two, so tomorrow in the morning we are going to shoot one more, and then one more with wax. We are spraying the Gel Coat thick so that we can wet sand it every year to keep it looking new and then when we get done spraying we are going to have to go after it with some 400/1000/2000 grit wet sanding to get out the shine! Going to finish up the last two coats tomorrow, and then we have to fill in some pin holes on the inside and shoot the inside as well, probably Wednesday. Really moving quickly, hopefully my aluminum will get in soon so we can start on the tower when the paint dries!
09-14-2015, 10:17 PM
Threaded Mode