Marsh blind brushing ideas

[Reefman]

Originally Posted by Spunt Drag

I like the hog panel bent at an arch with grass weaved and tied to it. I can't stand blinds that are squared off, with flat roofs. Looks like a big a$$ hotel sitting in the middle of the marsh.

If you have the time this is the best way to brush a blind in the marsh. If done right you can't even tell there is a blind in the pond. Cut the marsh grass and bind a handful at a time with electrical tape then weave into hog wire.

[BGcoreg]

Originally Posted by Reefman

If you have the time this is the best way to brush a blind in the marsh. If done right you can't even tell there is a blind in the pond. Cut the marsh grass and bind a handful at a time with electrical tape then weave into hog wire.

That is what we do but I'm curious to know where he puts the angled panel at . We only have panel on top of our boat hides. The rest of the blind is covered in Roseau growing straight up so it looks natural

[B-Stealth]

Originally Posted by BGcoreg

That is what we do but I'm curious to know where he puts the angled panel at . We only have panel on top of our boat hides. The rest of the blind is covered in Roseau growing straight up so it looks natural

He's talking about a pit or 1/2 barrel blind with salt grass only. You transplant marsh grass around the blind and also have a perimeter of hog panel. You bend the hog panel back towards you at a 45degree angle.

We're grassing a new blind this weekend I will try to post some pics.