Alright, trying to think where I left off. We got the foam on both the upstairs and downstairs front part of the cabin. We then pulled them off and this is what the ROUGH mold / copy looks like. We put the boards on them to straighten them up to glass the inside. With just one side glassed they are flimsy.
Then we spent the better part of the last two weeks, maybe more, painting, wet sanding, assembling, wirings, aligning motors, putting back in rudders, thru hulls, and just everything we could think of to the original. We even made them another 4 tuna tubes and stuck them to the back. Boat goes into the water TOMORROW!!!!
And then Harold went ahead and clean cut the edges of the two pieces of the cabin. What I don't have pictures of is that we took cardboard, like a fridge box, and made a trace of the rest of both of the cabins. And we have that traced onto the DivinyCell. And then since we are adding 3-4 feet to the boat, we added 1.5 feet to the bottom part of the cabin, and a foot to the upstairs station as well. Those pieces we stuck on at the end of the day today, and hopefully tomorrow we can put the long sides on the cabin.
More pictures coming soon, sorry for the delay
06-26-2017, 11:22 PM
Hybrid Mode
