![]() |
![]() |
![]() |
|
Boating Talk For discussion of everything related to boats and motors |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]()
I want a new BlackJack and I am about ready to order one. What suggestions on which Yamaha to put on it? Also, does anyone know if Dawson Marine in Beaumont handles BlackJacks?
|
#2
|
||||
|
||||
![]()
250 sho yamaha
|
#3
|
||||
|
||||
![]() |
#4
|
||||
|
||||
![]()
SHO is beast
|
#5
|
|||
|
|||
![]()
good choice of boat! be hard to go wrong with any of the options from yamaha.
Get a 300 if they will rate it for one! |
#6
|
||||
|
||||
![]()
Bruce they had a guy in Gulfport with a 300 right after the BJ came out and supposedly Bill Kenner approved it for the larger motor. Not sure but I think it is only rated for 250 hp? Problem comes in with trying to insure it if the mfg rating is exceeded know one will write coverage.
|
#7
|
|||
|
|||
![]()
the new F300 is 50 lbs lighter than the current F250 I think
looks MASSIVE |
#8
|
||||
|
||||
![]()
not to highjack the thread, but I was looking at specs online of new VSHO and weight was the same on the 200, 225, & 250?? That can't be right can it?? Said they all weighed 505 lbs.
|
#9
|
||||
|
||||
![]()
If it is the same weight it would make it very easy wouldn't it?
GO MAX HP ![]() |
#10
|
||||
|
||||
![]()
[QUOTE=cmdrost;161485]not to highjack the thread, but I was looking at specs online of new VSHO and weight was the same on the 200, 225, & 250?? That can't be right can it?? Said they all weighed 505 lbs.[/QUOTE
exact same motor for all three just different computers. if you know someone you can get a yamaha rep to program your 200 to a 250 and the insurance doesnt know the difference because the serial numbers say 200. |
#11
|
||||
|
||||
![]()
George at metro boating has a 300 verado on his i taklked to bill kenner at the nola boat show and he said thatt they dont put thats its approved for a 3000 on the hull but he approved it i dont know if this is on a boat by boat basis though
|
#12
|
||||
|
||||
![]()
I had a 225 Opti on mine and it ran loaded in the low-mid fifties loaded
|
#13
|
||||
|
||||
![]()
fo sho
|
#14
|
||||
|
||||
![]()
Is there any concern that the SHO with the 20 inch shaft might be a little short? Also, do you think that boat needs the 36v trolling motor or is the 24 big enough?
|
#15
|
||||
|
||||
![]() Quote:
need to have jack plate w/ the short shaft, and i got get nothing BUT a 36v its nice to have and the batteries last forever . i have a 36v on a 20 boat |
#16
|
||||
|
||||
![]()
yeah and your boat gets up on plane when your tm is on full blast
|
#17
|
||||
|
||||
![]()
Gotta get the jack plate with the Sho's short shaft.... 24v trolling motor should be fine.
|
#18
|
||||
|
||||
![]()
Thanks for the reply cmdrost. I know Bruce Baugh has it on his and I am waiting to hear from him on how much he has to manipulate it on any given trip.
|
#19
|
||||
|
||||
![]()
You will only need to set the jack plate one time....unless your at idle going into shallow water.
|
#20
|
||||
|
||||
![]()
I got my frontier from Dawson in Beaumont.....great customer service!!
They giving you a good deal on the blackjack? I'd love to upgrade. |
![]() |
Bookmarks |
|
|