![]() |
![]() |
![]() |
|
The Tackle Box (Lures, Baits, Rigs) Discuss everything related to tackle here, including making your own |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]()
anyone have a schematice or example picture of how to take down a shimano curado and the proper placement for oil and grease? I usually rinse mine down after fishing trips with water,then spray them down with silicone spray,but I have one that keeps squeeking.
|
#2
|
||||
|
||||
![]()
Same thing here. When I reel a decent fish in it sounds like it is grinding
|
#3
|
||||
|
||||
![]()
This is from Shimano's website: (I just shortened it )
Shimano's cleaning guide |
#4
|
|||
|
|||
![]()
I use reel magic on mine,soak them down reel good when i get back,never had any problems.
|
#5
|
||||
|
||||
![]()
Soakin your reels is bad it pushes the salt into them, just mist em off and hit em with quantum hot sauce oil it's the best oil I've found hands down every one in a while you can clean the spool shaft, brakes, worm drive with rubbing alcohol and a qtip then re oil ther is also small rectangular holes on the underside of your reel a drop of oil helps every once in a while but don't overdue it bcuz the built up oil attracts dirt n dust
|
#6
|
||||
|
||||
![]()
Oh come guys, help out a good guy and bring them to "REELMAN" he's the best.
|
![]() |
Bookmarks |
|
|