|
|
|
|
|||||||
| General Discussion (Everything Else) Discuss anything that doesn't belong in any other forums here. |
 |
|
|
Thread Tools | Display Modes |
|
#1
11-17-2009, 07:08 PM
|
||||
|
||||
Billystix and xmas
 SANTA IS ON THE WAY, AND IF BY CHANCE A STIX IS IN YOUR XMAS PLANS THEN I WOULD BE SEEING ABOUT GETTING IN TOUCH WITH BILLYSTIX CUSTOM RODS. I JUST WANT YOU TO KNOW THAT I CAN AND DO BUILD VERY NICE CUSTOM SPIRAL RODS FOR WAY LESS THAN $250 SO YOU DONT HAVE TO SPEND THE HIGH DOLLAR TO GET A GREAT SPIRAL ROD. I CAN BUILD YOU A 6FT6 OR A 7FT SPIRAL WITH ALL THE GOODIES #1 CORK GRIPS GOOD GRAPHITE BLANK CUT OUT REEL SEAT FOR EXTRA FEEL AND YOU STILL COME IN UNDER $200 AND I WILL PUT TITANIUM GUIDES ON FOR YOU AT NO XTRA CHARGE, NOT A BAD DEAL CONSIDERING THE TITANIUM GUIDES ALONE ARE CLOSE TO $90 A SET. SO GIVE IT SOME THOUGHT NOW IF YOU WANT TO STEP UP TO VIPER BLANKS MADE IN THE USA YES NOW YOU ARE WELL OVER $200 BUT YOU ARE GETTING THE MERCEDEESS OF RODS. STIX PS I ALMOST FORGOT I AM NOW BUILDING THE "HARLEYSTIX" I WILL HAVE ONE COMPLETED IN A FEW DAYS, THIS STIX IS FOR YOU "EASY"RIDERS OUT THERE AND IT IS GOING TO BE A KILLER ROD I AM HAVING THE DECALS MADE AS WE SPEAK, HERE IS A PHOTO OF THE 2 CECALS TO PICK FROM.
__________________
BILLYSTIX CUSTOM RODS ARE SOME OF THE FINEST CUSTOM RODS FISHED , TRY THE CUSTOM BILLYSTIX SPIRAL "SPIRALSTIX" PLEASE VISIT MOLLY AND BRANDI AT WWW.BILLYSTIX.COM WE NOW ACCEPT PAYPAL FOR YOUR PURCHASE i can be reached at this number 352-377-5894
|
|
| Bookmarks |
|
|
Linear Mode
